-
Openbox s9 high defintion satellite pvr receiver for sale
OPENBOX S9 HIGH DEFINTION SATELLITE PVR RECEIVER
New, never been used (purchased from Leroy), $95 plus post
The Openbox S9 is fully DVB-S/DVB-S2, MPEG-2/MPEG4 compliant. It features quick and accurate hardware Blind Scan and AC3 audio. The Openbox S9 HD is also PVR ready to record your favorite programs or for time-shifting*. (*external hard drive required)
OPENBOX S9 HD PVR receiver main features
• This receiver has similar functions to the Dreambox
• CAM/CI card slot support built in, works with NDS Foxtel cards and Irdeto service like Aurora 1 & 2 cards
• Ethernet Port for use with CCcam and Newcs/Newcamd services
• Linux Operating System
• DVB-S / DVB S2 Tuner
• Fast and accurate DVB-S/S2 hardware based blind scan function.
• PVR (Personal Video Recorder) function with external USB HDD
• Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech, selectable.
Included in the orginal box:
· Openbox S9 HD receiver
· Remote
· Instruction Manual
OPENBOX S9 HD PVR receiver General Specifications:
*Receives Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
*Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4 USB (external flash or hard drive)
*Worldwide compatible
*Hardware Blind Search DVB-S and DVB-S2
*STB main chipset is ALi , demodulator model is M3501 from Ali
*HD DVB-S2 SHARP 7306 Tuner
*Multilingual support on screen menu (OSD):
*300 MHz MIPS Processor – Linux OS
*Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1;
*Fully compliant MPEG-2 MP@HL & MP@ML;
*Fully compliant MPEG-1 Layer I & II & III,
*Dolby Digital Audio(AC3)
*SCPC & MCPC receivable from C/Ku band satellites
*Multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable)
*Motor Support: DiSEqC 1.2/1.3 (USALS – GoTo X)
*HDMI 1.3 output (HDMI cable INCUDED from OpenBoxS9.us)
*PVR (store on USB external disk)
*Multimedia files playback (by USB);
*7 Days Electronic Program Guide (EPG)
*Teletext and subtitle out through OSD
*Multi-lingual DVB subtitle and teletext
*Automatic and Manual Channel Scan, Automatic Service Scan
*NIT search, Hardware BLIND SEARCH
*Fast channel switching < 1 second
*OSD in many languages and skin-support
*Multilingual support on screen menu (OSD)
*Multiple display mode: 1080i/720p/570p/576i/480p;
*Videotext Decoder
*Analog RCA audio output: stereo (L+R);
*Digital audio output: S/PDIF by coaxial
*S/PDIF Interface for digital bit stream out (AC-3)
*YCbCr Component Video Output
*2 x Scart (RGB, FBAS or S-Video)
*Screen format: Auto, 4:3, and 16:9;
*Upgrade software through USB2.0 port
*Powerful user interface program management function, parent lock
*1x CI built-in
*1x CA (smartcard reader) built-in
*10/100Mbit Ethernet Interface
DVB-S2 Tuner
Input Frequency:950~2150MHz
Loop Out Frequency:950~2150MHz
Input Level:-65~-25dBm
Input Impedance:75
LNB Power: Auto/14v/18v/OFF, Imax = 500mA
Video decoder
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder
Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Digital Output
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output, Toslink
Video parameters
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart
Output: FBAS, RGB
Serial Interface RS 232
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet
10/100 MBit compatible interface
Function: Update of Firmware
USB
1 x USB 2.0 Host ,PVR
LNB power and polarization
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17.3V at 400mA
Motor Controls
DiSEqC 1.0/1.1/unicable/1.2 SAT POSITION / SAT OPTION
DiSEqC – Rotor Control
Power Supply
Input:110-240V AC / 50-60Hz / 0.6A
Output: 12V = / 3,0A
Physical specifications
Ambient Temperature +15°C ~ +35°C
Humidity < 80%
Size (W x D x H): 300 mm x 220 mm x 56 mm
Weight: 1.8 kg without HDD
Power
AC input range:100-240VAC 50/60Hz
Power Consumption (Standby): Max. 10W (<1W)
-
As a matter of interest,why did you buy it in the first place,and never used it??
Bought with the intention of using it but never got round to it. I do have other boxes mate
Are you interested, or just trolling ?
Last edited by Hillsbysa; 20-08-14 at 11:39 PM.
Reference to compatibility with Foxtel cards is no longer the case, sorry. Also, Aurora no longer have transmissions
Junior Member
Feedback Score 5 (100%)
- Rep Power
- 200
- Reputation
- 30
Might be interested if I can after market help noob to Sat scene.
Stan (or anyone else), if you want to go ahead and buy please let me know by Wednesday latest.
cheers
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks