CFT 2100 and "Your terminal is deactivated"

**tragon** · 19-02-08, 08:22 AM

Regards from Spain.

To seeing if someone can help me.

I have a CFT 2100 that when they gave it to me was showing always the same channel, put it where you put it. Change the Chip and I put an Ali 1.31 and not reset and it was still equal but now me the remote control was not working distantly either. I tried reset with the Tcinit and nothing, put a superchip with hexgen4 and reset but one was not arranging the channels for what I returned to place the ali and now it goes out always " His(Her,Your) terminus(terminal) is descativado " ... and it continues without works the remote control (that it is nice because it is proved(tried) in another box).

It follows me without reset neither with the tcinit, nor with the Rs 232, not boxup... the remote control does not go and if I return when the hexgen places 4 it remains equal (" His terminal is deactivated").

Can someone solve like the topic?. Does command exist algun to activate it? Since it puts on him?.

Thanks.

**tragon** · 14-03-08, 06:06 AM

Could serve a Service Code Generator (SCG)?.
Does Anyone has used?.

hoop://***.newelectronx.com/products.php?cat=10&pg=2

Regards.

**checkitout** · 31-05-08, 08:51 PM

Hi There - Been a long time since I thought about the CFT2100 box. We used to have Analogue cable here but it is long gone. The SCG did not always work, but could be worth a try.

**covert** · 16-06-08, 11:00 PM

Testing my memory on this one...

What I am going to write will be incomplete and possibly wrong..

Have you got the correct ESN in your Ali/Superchip file ?

Did tcinit find your box ESN when it scanned ? (by turning off)

19-02-08, 08:22 AM	#1 (permalink)
tragon Junior Member iTrader: (0) Join Date: Feb 2008 Posts: 4 Spent time on board: -	CFT 2100 and "Your terminal is deactivated" Regards from Spain. To seeing if someone can help me. I have a CFT 2100 that when they gave it to me was showing always the same channel, put it where you put it. Change the Chip and I put an Ali 1.31 and not reset and it was still equal but now me the remote control was not working distantly either. I tried reset with the Tcinit and nothing, put a superchip with hexgen4 and reset but one was not arranging the channels for what I returned to place the ali and now it goes out always " His(Her,Your) terminus(terminal) is descativado " ... and it continues without works the remote control (that it is nice because it is proved(tried) in another box). It follows me without reset neither with the tcinit, nor with the Rs 232, not boxup... the remote control does not go and if I return when the hexgen places 4 it remains equal (" His terminal is deactivated"). Can someone solve like the topic?. Does command exist algun to activate it? Since it puts on him?. Thanks.

16-06-08, 11:00 PM	#4 (permalink)
covert Premium Member iTrader: (8) Join Date: Jan 2008 Location: My Imagination Posts: 682	Testing my memory on this one... What I am going to write will be incomplete and possibly wrong.. Have you got the correct ESN in your Ali/Superchip file ? Did tcinit find your box ESN when it scanned ? (by turning off) __________________ By reading this, you have already given me control over a tiny slice of your mind

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

14-03-08, 06:06 AM	#2 (permalink)
tragon Junior Member iTrader: (0) Join Date: Feb 2008 Posts: 4 Spent time on board: -	Could serve a Service Code Generator (SCG)?. Does Anyone has used?. hoop://***.newelectronx.com/products.php?cat=10&pg=2 Regards.

31-05-08, 08:51 PM	#3 (permalink)
checkitout Premium Member iTrader: (2) Join Date: Jan 2008 Posts: 299 Spent time on board: 4 Days and 13:20:21	Hi There - Been a long time since I thought about the CFT2100 box. We used to have Analogue cable here but it is long gone. The SCG did not always work, but could be worth a try.

Sponsored Links