Thread: pixelation on some channels

2 things come to mind....

1. signal strength and quality

2. disable "fast zap" (I have no idea what that is but it solved my pixelation issues. Others have mentioned it here).

Not sure your image so cant help as to where to turn off fast zap but it ti in the menu/setup/User Interdace Settings/OSD options/Enable Fast Zapping
in Jade Pli image.

good luck

porkop

fast is not enabled
its a pli image not to sure on witch one
running cccam 2.011
signal strength is good poxtel set it up
thanks

try changing your av setting from pal to multinorm

Change Cccam to 1.17 version and see if it makes any differents

Originally Posted by clint316

i have just got a dreambox 500s working with blue poxtel card from the oldies house

OK, if you are card sharing from your oldies house then there could be too much delay over the internet connection???

what is the speed, is there anything else happening over the internet connection, ie, downloading, voip, etc?

When I had a play with a blue foxtel card recently I was using cccam 2.05 with no problems.

Leroy

not card sharing but it is from a cable box if that makes any difference. I also changed pal to multinorm. Thanks

have tried cccam 1.17, 2.05, 2.08, 2.09, 2.11

if you are not Cs and it is only happening on certain channels then i would not think it is actually the emu you are using but more so an issue with the lnb .

could just need a tiny tweak in the skew to sort the problem out

i have just noticed that the ber meter is going from 4 to 5 on good channels
and 0 to 2 on bad channels

i have no idea what is going on here, i have just plugged the box in another point i have a quad lnb and it now seems every channel is working except for the ci channel

the ber is on 4.6 no on the ci channel but no pics

as i mentioned it sounds suspiciously like a lnb issue