Is there no image on your box? You can go into the Expert Setup and Communication Setup menus and change you IP address there.
Leroy
Hi,
I was trying to change my network settings in my dreambox 7020 via the
" Dreambox ADVANCED SETUP UTILITY" and
during the Telnet session I ‘accidentaly’ changed the network settings in the Advanced section from dhcp to ‘disabled’ and then closed my session, now am not able to connect to the Dreambox at all .
When I press and hold the "Down " button and turn on the Dreambox , the LCD screen displays the word "STOP" but no ip address ,repeat no ip address is displayed.
Am really stuck. Can anyone please urgently help me detailing in a step wise fashion what to do to be able again get the ip address of my dream box.
TIA
Look Here -> |
Is there no image on your box? You can go into the Expert Setup and Communication Setup menus and change you IP address there.
Leroy
Thks your reply
There is an image in my dreambox . Howevere, am not talking about the ip address found in the expert setup of the dreambox, rather am talking about the ip address for the dreambox to get access via the internet browser to the dreambox bootloader page where you can find the network setup in a page called " Dreambox ADVANCED SETUP UTILITY".
Usually this ip address is obtained
When I press and hold the "Down " channel button and turn on the Dreambox , the LCD screen displays the word "STOP" and an no ip address.
In my case when I do that I can't get an ip address
i think if you reflash with dreamup and a null modem lead it might renew ALL these settings, or you could try just flashing a boot loader via dreamup and null modem cable
go to stop mode as your normally do
use DCC to do a network search (click on search)
You should see it on the LAN as DM7020
Use the IP address shown in DCC in your web browser
Good luck
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
by reading what unisat has done
he has disabled IP (no dhcp or fixed) in stop mode
this at bios or bootloader stage
I would tend to agree with digidudes assessment
instead of 'oh dearing' you should explain why, dear!
Leroy
looks to be a common problem - from another web site a user called nabat has the same problem
Need urgent Help with Dreambox 7020 ip address Pls
Hi,
I was trying to change my network settings in my
dreambox 7020 via the
" Dreambox ADVANCED SETUP UTILITY" and
during the Telnet session I ‘accidentaly’ changed
the network settings in the Advanced section from
dhcp to ‘disabled’ and then closed my session, now
am not able to connect to the Dreambox at all .
When I press and hold the "Down " button and turn
on the Dreambox , the LCD screen displays the word
"STOP" but no ip address ,repeat no ip address is
displayed.
Am really stuck. Can anyone please urgently help me
detailing in a step wise fashion what to do to be
able again get the ip address of my dream box.
TIA
-----
opps maybe the same user different name
-----
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
If hooked to router set router to DHCP then look in router for it's ip address that is connected.
O deary me
Leroy
the point is by setting IP to disabled it is not DHCP - therefore it does not get an address - therefore there is nothing in the router set-up of DHCP leases
Frank might be onto something - why not go back to the Dreambox ADVANCED SETUP UTILITY via a serial connection and hyperterminal
other than that reflash - definitely - jtag - hopefully not
out of interest how do you get to the Dreambox ADVANCED SETUP UTILITY via telnet on network - seems to be a serial connection is required ?
How can I set up a PPPoE connection with user and password to connect to internet. I have found no solutions on searching over internet.
Please let me know what is the problem, thank you.
Your solution is good for the metter. I also have no caracter display on my DB 7020 so I can not see the IP. Still, it would take a long time to scan the range normally used for Dreambox which is 192.168.xxx.xxx. And by the way, is this IP changing or is fixed?
Speaking of LCD display, my db display a darker filled rectangle instaed of any caracters ever. I have original firmware.Any sugestions? Thank you
Bookmarks