check
lnb settings are correcting
Hi All, absolute noob here, hence the question. I actually paid someone to install my fixed 1.8m satellite dish and am hook up to the FTA channels with a strong 4651X. I have recently given a Dreambox DM-500s with Gemini image which i am trying to get it to work.
My setup is: 1.8m fixed dish and 2 LNB pointing at Asiasat 3S and Chinasat6B.
My current problem is i can't lock to any satellites at all. when i do a satfind, i am geting 23% SNR, 0% AGC and 8224 BER. my gut feeling, it has something to do with incorrect Diseqc parameter (which i have tried A/A, A/B,....1,2, but without any success).
Here is my question, is it possible for me to set the satellite configuratin to one single satellite even though i have 2 LNBs?
thanks again for your time.
Look Here -> |
check
lnb settings are correcting
Goto menu > setup > sat config > service searching
Change setting to "Non standard user confined config"
High light LNB0 & press OK.
Enter your LNB setting there to match the LNB you are using.
If it is C-Band, it will most likely be 05150 in all three boxes
Reality is an invention of my imagination.
ಠ_ಠ
Tread carefully with the Gemini image - you have been warned .
Hi thanks for the advise, fernboy is correct, it is the lnb setting. now i come to another problems. i managed to scan the transpoders and saved all the service but somehow i can only watch some of the FTA. (i.e. approx 12 out of 80+). any ideas anyone?
ps: sorry still new here, let me know if you want me to post this as a new thread.
Reality is an invention of my imagination.
ಠ_ಠ
playing with the box menu's setting for a couple of hours will teach you everything you need to know
Just reimage it....over and over and over.
Then say box is faulty....
Bookmarks