Have a look at post #22
Hi All,
I am wondering, has anyone here tried cccam 2.1.2 and the latest cccam config, trying to set up a DM500 and i cant seem to get it right, could anyone here help point me in the right direction to set this up.
Running Dm500 and Blue.
If required I am happy if answers are via PM, thanks in advance
Cheers
Hannible
Look Here -> |
Have a look at post #22
that link takes you off to a newcs config
Everyone has their own variants of CCcam.cfg
mine are something like this
note for a box with the card in it you dont really need f: or C: line - I put it in for anyway..
Code:############################################### ## Servers I use ## ############################################### C: ServerIP 12000 dm600 dm600pw yes ############################################### #### My Friends who connect to me #### ############################################### F: dm600 dm600pw F: dm500 dm500pw CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 # CAMKEY: /dev/sci1 00 00 00 00 00 00 00 00 SERVER LISTEN PORT : 12000 INFO LISTEN PORT : 16000 HTML INFO LISTEN PORT : 16001 ALLOW WEBINFO: yes WEBINFO USERNAME : root WEBINFO PASSWORD : dreambox ZAP OSD TIME :2 OSD USERNAME :root OSD PASSWORD :dreambox SHOW TIMING : no DEBUG : yes NEWCAMD CONF :no DISABLE EMM : no EXTRA EMM LEVEL : no SOFTKEY FILE : /var/keys/SoftCam.Key AUTOROLL FILE : /var/keys/Autoroll.Key STATIC CW FILE : /var/scce/constantcw CAID IGNORE FILE : /var/keys/CCcam.ignore LOG WARNINGS : /tmp/warnings.txt # SOME MIGHT NEED THIS # TRY ALL CHIDS : /dev/sci0
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
Not if you look at post 22 as directed:
I asume from post#1 you want bluey to work in a stand alone dream, if so....
If you do not intend to share you don't need the cccam.cfg at all, let alone newcs!!
If you have downloaded a version of CCcam, make sure it is enabled for foxtel,
Via the blue button go to, autocamd setup, highlight "provider foxtel" use right vol arrow on remote and "set new camd" value to cccam 2.11 (or your installed version) just exit, change channels and the blue card will kick in.
You may want to do the above on a fresh flash as all the stuffing around with needless cccam config/newcs.xml editing may have corrupted the seamless way the above works.
I have done this with many dm500-s boxes running GEMINI, but never with a cable version.
I use GEMINI V4.1 on all my client decoders too, 2 of which are Mutant 200s boxes, because it has the best menu in my opinion.
Bookmarks