That;s how I have mine running except I have a DM500S
Been trying all night without success. Has anyone able to get a bluey card running successfully in a oscam on a dm518 with a phoenix reader. Just want to know if this is possible. Or i should just focus on using a smargos? I'll do more searching in later on.
Thanks
Look Here -> |
That;s how I have mine running except I have a DM500S
Cheers, Saintaholic
yes this will work just fine done it many times now, have you tried reading your nds card in the phoenix with the appropiate software to confirm that the reader is fine?
also might need to post your configs ( removing the sensitive info but hashing it out of course ) so we can see if its setup right?
where is my tinfoil hat?
why not just use in front slot ???
my dm518 doesn't has an internal reader. Anyway, finally got it working.. I reflashed with the oscam-cccam-dm518 img.
Changed the oscam.server to
[reader]
label = foxtel
enable = 1
protocol = mouse
device = /dev/tts/0
services =
caid = 090b
detect = cd
mhz = 800
cardmhz = 500
ident =
group = 1
emmcache = 1,1,2
ecmcache = 1
lb_weight = 100
Here is the log.
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Jan 2 20:43:39 2011
-------------------------------------------------------------------------------
2011/01/02 20:43:39 1036 s version=0.99.4svn, build #2967, system=powerpc-tuxbox-linux
2011/01/02 20:43:39 1036 s max. clients=29, client max. idle=120 sec
2011/01/02 20:43:39 1036 s max. logsize=10 Kb
2011/01/02 20:43:39 1036 s client timeout=5000 ms, fallback timeout=1500 ms, cache delay=0 ms
2011/01/02 20:43:39 1036 s shared memory initialized (size=497450, fd=6)
2011/01/02 20:43:39 1036 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/01/02 20:43:39 1036 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/01/02 20:43:39 1036 s monitor: initialized (fd=10, port=988)
2011/01/02 20:43:39 1036 s camd 3.3x: disabled
2011/01/02 20:43:39 1036 s camd 3.5x: disabled
2011/01/02 20:43:39 1036 s cs378x: disabled
2011/01/02 20:43:39 1036 s newcamd: initialized (fd=11, port=15000, crypted)
2011/01/02 20:43:39 1036 s CAID: 090B
2011/01/02 20:43:39 1036 s provid #0: 000000
2011/01/02 20:43:39 1036 s cccam: initialized (fd=12, port=15010, crypted)
2011/01/02 20:43:39 1036 s radegast: disabled
2011/01/02 20:43:39 1036 s logger started (pid=1039)
2011/01/02 20:43:39 1036 s Resolver thread started
2011/01/02 20:43:39 1036 s http started (pid=1041)
2011/01/02 20:43:39 1036 s reader started (pid=1042, device=/dev/tts/0, detect=cd, mhz=800, cardmhz=500)
2011/01/02 20:43:39 1036 s waiting for local card init
2011/01/02 20:43:39 1041 h HTTP Server listening on port 8888
2011/01/02 20:43:41 1042 r02 card detected
2011/01/02 20:43:45 1042 r02 ATR: ...
2011/01/02 20:43:47 1042 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 8.00 Mhz
2011/01/02 20:43:48 1042 r02 [videoguard2-reader] type: VideoGuard Foxtel Australia (090B)
2011/01/02 20:43:49 1042 r02 card system not supported
2011/01/02 20:43:49 1042 r02 Normal mode failed, reverting to Deprecated Mode
2011/01/02 20:43:54 1042 r02 ATR: ...
2011/01/02 20:43:55 1042 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 8.00 Mhz
2011/01/02 20:43:56 1042 r02 [videoguard2-reader] type: VideoGuard Foxtel Australia (090B)
2011/01/02 20:43:56 1042 r02 [videoguard2-reader] ins36 returned unknown type=0xF9 - parsing may fail
2011/01/02 20:43:56 1042 r02 [videoguard2-reader] ins36 returned unknown type=0x03 - parsing may fail
2011/01/02 20:43:58 1042 r02 [videoguard2-reader] type: VideoGuard, caid: 090B, serial: ..., BoxID: ...
2011/01/02 20:43:58 1042 r02 [videoguard2-reader] ready for requests
2011/01/02 20:43:58 1042 r02 [videoguard2-reader] card detected
2011/01/02 20:43:58 1042 r02 [videoguard2-reader] type: VideoGuard
...
Also, should I worry any of the errors? Thanks all...
Last edited by ttliew; 03-01-11 at 12:22 AM.
Bookmarks