Reply With QuoteWhy don't you mention the provider?
Someone else here might know any particular countermeasures they have and all can learn from this.
IRServer with provider Sub
Can someone help me please.
I have IRServer with genuine IR2 Sub (Not Austr) everything is working correctly except when I enable au for the user I'm getting
Invalid ECM or EMM format in log.
Obviously when au is disabled card is missing updates.
| Look Here -> |
Why don't you mention the provider?
Someone else here might know any particular countermeasures they have and all can learn from this.
Which version of IR server are you using?Originally Posted by zumka
Also have you tried different client cams including different versions e.g. CCcam or mgcamd etc?
I believe you may also have some settings in IR server setup you may need to try.
i would have to think it is your client softcam , irserver does what it does if you have your card reader set correctly , check your softcam config and make sure everything is set out correctly , TURN OF ANY FKN FIREWALL UNTIL YOU HAVE IT RUNNING SWEET , mgcamd is easy as to set up , start with it .
ConnectTV. Decoder died trying to comme up with the solution while waiting for the replacement.
IRSrv 2.7 running on XP using epsilon sub with 6mhz phoenix reader
weirdo (09-01-11)
what softcam ? any firewalls?
CCcam no firewalls.
give mgcamd a try
make sure your Cccam is an older version - 2.0.5 is probably what you want
the newer versions can cause troubles with coms back to the server
f
有段者
ajax (09-01-11)
What about updates older versions of CCcam will not send EMM to the card.
updates to card were good from 2.0.5 onwards
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
No good, tried CCCcam 2.0.0, 2.0.9, 2.1.4, 2.2.0
All produces the same error in IRServer (Invalid EMM or ECM format)
I have also tried the card in the internal slot of DM800 with the following config:
With the same CCCam versions as above.Code:CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00 CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 TRY ALL CHIDS : /dev/sci0 SMARTCARD CLOCK FREQUENCY : /dev/sci0 6000000
Everything is fine I can see all the entitlements except there are no pictures.
I suspect maybe it needs specific Camkey and Camdata
Last edited by zumka; 09-01-11 at 07:06 PM.
try mgcamd
hopefully he heard you this time!
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Mgcard as the server or client ?hopefully he heard you this time!
Leroy
client
...Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
IRServer + MGcamd
Same thing invalid ECM or EMM format
what version mgcamd? ,have you setup newcamd.list file properly , have you deleted newcamd.list.example , where did you get your version of irserver from(maybe corupt?), maybe you need to look for a diiferent irserver file ,do you have the 2.7 patched version ?, try another version , maybe look in premium members for another version
Mgcamd setup is correct since I'm getting pictures. I am using 2.7 patched version of IRser. I'll try different version.
Maybe this provider has it's own variant of countermeasure.
If you can read and write russian, it might even be worth your while to try some of the russian forums. There's supposed to be some serious hackers there.
Posting Permissions
Bookmarks