Thread: CS Aurora Help

Hi Guys,

I had my setup working fine but now it doesnt seem to work.
I was CSing aurora to another box in the house, but now it doesnt work, didnt change any settings.
I have connected box boxes up via a router and both have been confirmed to be connected to the network by accessing them on a computer also connected on the network.

Im using Cccam 2.2.1 and below is my cfg file:

For server:

Code:

#### Server DM7020 Config ####
#### Server IP 192.168.1.10 ####
###############################################
#### My Friends who connect to me ####
F: user1 pass1
###############################################
## Servers I use ##
C: ipaddress 17119 user5 pass5 no
###############################################
############## CAMKEY required ################
###############################################
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMKEY: /dev/sci1 00 00 00 00 00 00 00 00
###############################################
SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6860002
CAMKEY: /dev/usb/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/usb/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#TRY ALL CHIDS : /dev/usb/tts/0
SERVER LISTEN PORT : 17500
WEBINFO LISTEN PORT : 21000
TELNETINFO LISTEN PORT : 16000
ALLOW TELNETINFO: yes
#ALLOW WEBINFO: yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
#TELNETINFO USERNAME : 
#TELNETINFO PASSWORD : 
#OSD USERNAME : root
#OSD PASSWORD : dreambox
#DISABLE EMM : no
#SHOW TIMING : yes
#ZAP OSD TIME : 0
#DEBUG : yes
#NEWCAMD CONF : no
#EXTRA EMM LEVEL : no
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/Autoroll.Key
#STATIC CW FILE : /var/scce/constantcw
#CAID IGNORE FILE : /var/keys/CCcam.ignore
#LOG WARNINGS : /tmp/warnings.txt

For Client:

Code:

#### Client DM600 Config ####
#### Server IP 192.168.1.15 ####
#### My Friends who connect to me ####
###############################################
###############################################
## Servers I use ##
C: 192.168.1.10 17119 user1 pass1 no
###############################################
## CAMKEY required ##
###############################################
#CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
#CAMKEY: /dev/sci1 00 00 00 00 00 00 00 00
###############################################
#### Please do not change this Config ####
#### It is preset to read Iredto 2V5 & NDS ####
#### Works with UBC, DSTV, ZEE, Astro,ST1 ####
#### DreamTV, TataSky, FoxTel, Auroua, Sky ####
#### Australia Network and many others~ Noi####
###############################################
SERVER LISTEN PORT : 17500
WEBINFO LISTEN PORT : 21000
TELNETINFO LISTEN PORT : 16000
ALLOW TELNETINFO: yes
#ALLOW WEBINFO: yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
#TELNETINFO USERNAME : 
#TELNETINFO PASSWORD : 
#OSD USERNAME : root
#OSD PASSWORD : dreambox
#DISABLE EMM : no
#SHOW TIMING : yes
#ZAP OSD TIME : 0
#DEBUG : yes
#NEWCAMD CONF : no
#EXTRA EMM LEVEL : no
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/Autoroll.Key
#STATIC CW FILE : /var/scce/constantcw
#CAID IGNORE FILE : /var/keys/CCcam.ignore
#LOG WARNINGS : /tmp/warnings.txt

But it doesnt seem to work or show up in the web info.
In Webinfo for the client it shows that it is connected to the other Dreambox but doesn't have any cards:
Host----------------|Connected| Type------| Version| NodeID|Cards|CAID/Idents|
+----------------------+------------+---------+--------+----------------+-------+
|192.168.1.10:17119|-----------|CCcam-s2s|--------|-------|---0-|------------|


But under webinfo for the server it doesnt show any client connected.
It does show 1 avaliable share under 'Shares' though.
| Host---------| Type-------|Caid|System| Providers|Uphops Maxdown| Nodes |
+----------------------+------------+----+-------+----------+-------+-------+
|/dev/usb/tts/0|smartreader+|626|irdeto|---0,1------|0--11-----------|------|


The server box also recieves a share, which might be limited to just one downshare, could this cause a problem?

Any help would be great.

Cheers

Edit:

Ok i have been able to connect the initial share i receive to my other box.
But had to swap around which box was the server and which was the client.

But aurora still wont work from the Dm7020 to the Dm600.
I would just use the whitey in the DM600 but im using a smargo to run it and a DM600 doesn't have a usb


Edit 2:
Im pretty sure that the problem is that the DM7020 is not sharing any card it has for some reason, but will still connect to another server and clients can still connect to it. Does anyone know what might be causing this issue?
It obviously doesn't have to do with porting on my router as the other share is working between the two dreambox's, so im thinking it has to do entirely on some setting im missing either in my CCcam file or another setting in my dreambox

Cheers