Faulty LG 50" RT-50PZ45V

**Shibster** · 06-10-08, 12:59 PM

Gents,

Looking for advice on a faulty LG RT-50PZ45V.

Powered on worked ok for a while then heard a click and it turned off.

Tried to turn back on led went green for about 10secs with no pic....click back to Red.

Rinse and Repeat.

Anyone know of any common faults with this unit and or anyone quality repairers in Melbourne for this unit if its not worth my time looking at repairing myself.

Cheers

Shibby

**iwacelect** · 07-10-08, 07:34 AM

shibster, if you aint got lines down the screen yet then it's prob worth fixing...
check for the Vs and Vy voltages to the y-sus pcb, then unplug the y-sus pcb then the z-sus pcb and see if the fault dissappears that should show you where the prob is

**best4less** · 07-10-08, 08:03 AM

My money is on the Y-Sus board

**oceanboy** · 07-10-08, 08:05 AM

How come it is always the LG TVs breaking

**Shibster** · 07-10-08, 08:21 AM

Thanks for the reply gents.

Does anyone have a Circuit Diagram Handy for this unit?

So the Y-sus board goes faulty and draws down the P/S or the tv simply knows its faulty and doesnt allow it to startup?

**best4less** · 07-10-08, 08:25 AM

LG's are good because the parts are cheap and you can get them

**Shibster** · 07-10-08, 09:31 AM

Can Anyone recomend a repairer close to Melbourne for this unit?

**iwacelect** · 07-10-08, 12:23 PM

Quote:

Originally Posted by best4less

LG's are good because the parts are cheap and you can get them

LOL... not if you own one, but do make techs money

**Shibster** · 07-10-08, 01:17 PM

So no ideas on a good repairer in Melbourne?

**best4less** · 07-10-08, 01:22 PM

Make a few calls and ask what they charge to replace a Y-Sus board,
Might give you a place to start, Me I am on the other side of town

**Shibster** · 07-10-08, 01:26 PM

Is it possible to purchase a Y-SUS Board from you and does it involve soldering or simple ribbon/multi strand leads?

**iwacelect** · 07-10-08, 03:53 PM

i've got a few good ones here, let me know if your interested and i'll dig one out for you!

but if you want to get it to me then i'm closer than B4L....LOL

**best4less** · 07-10-08, 07:05 PM

Yeah postage would be the killer

**angao** · 07-10-08, 09:25 PM

Quote:

Originally Posted by Shibster

So no ideas on a good repairer in Melbourne?

where about you live in melbourne ?

**fandtm666** · 07-10-08, 09:38 PM

make sure if you do it yourself you have a good 1/2 dozen containers for all the different size screws and some time to do it.When i did mine took me 3 hrs pulling it apart to replace the three boards and being very carefull with the mini ribbon cables

**iwacelect** · 08-10-08, 07:34 AM

@fandtm666, mate we were doing 8 per day per tech at one stage, as far as the screws are concerned mate lg's are nothing, have you had the happy-happy joy-joy experience of dismantling a philips plasma.....

mate you'd love to get back to a nice easy lg!

heads up, bugger the mini cables themselves, they're not a prob... but watch out for the little connectors they go into... they're a real bugger... break that little brown locking clip off and your buggered!

**best4less** · 08-10-08, 01:31 PM

Quote:

Originally Posted by iwacelect

have you had the happy-happy joy-joy experience of dismantling a philips plasma.....

Last time I did one it was almost 200 screws well that's what it felt like
Maybe that's why i hate Phillips sooooo much

**iwacelect** · 08-10-08, 01:59 PM

not only that B4L, it's when taking apart a philips plasma i fell like a big kid at a party, and someone handed you a "pass the parcel" you rip off 1 coating of wrapper just to find another.....

eg take the back off, now take the black surround with the ambi-lights off, now take off the gold frame... AND ALL THIS "JUST" TO GET TO THE BLOODY PCB'S, WOOH BE TIED IF YOUR DOING A PANEL....

why have you put down that screwdriver OOHHH we haven't finished yet!!!!

06-10-08, 12:59 PM	#1 (permalink)
Shibster Junior Member iTrader: (0) Join Date: Feb 2008 Posts: 23 Spent time on board: 13:26:44	Faulty LG 50" RT-50PZ45V Gents, Looking for advice on a faulty LG RT-50PZ45V. Powered on worked ok for a while then heard a click and it turned off. Tried to turn back on led went green for about 10secs with no pic....click back to Red. Rinse and Repeat. Anyone know of any common faults with this unit and or anyone quality repairers in Melbourne for this unit if its not worth my time looking at repairing myself. Cheers Shibby

07-10-08, 07:34 AM	#2 (permalink)
iwacelect Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 324 Spent time on board: 6 Days and 2:38:10	shibster, if you aint got lines down the screen yet then it's prob worth fixing... check for the Vs and Vy voltages to the y-sus pcb, then unplug the y-sus pcb then the z-sus pcb and see if the fault dissappears that should show you where the prob is __________________ When I explained to the guy what avatar I wanted, that wasn't what I meant!

07-10-08, 08:03 AM	#3 (permalink)
best4less I'am Not a Bloody Joke iTrader: (10) Join Date: Jan 2008 Location: Australia Posts: 2,618 Spent time on board: 1 Month, 4 Weeks, 0 Days and 12:30:26	My money is on the Y-Sus board __________________ Please wipe your feet before walking all over me

07-10-08, 08:25 AM	#6 (permalink)
best4less I'am Not a Bloody Joke iTrader: (10) Join Date: Jan 2008 Location: Australia Posts: 2,618 Spent time on board: 1 Month, 4 Weeks, 0 Days and 12:30:26	LG's are good because the parts are cheap and you can get them __________________ Please wipe your feet before walking all over me

07-10-08, 01:22 PM	#10 (permalink)
best4less I'am Not a Bloody Joke iTrader: (10) Join Date: Jan 2008 Location: Australia Posts: 2,618 Spent time on board: 1 Month, 4 Weeks, 0 Days and 12:30:26	Make a few calls and ask what they charge to replace a Y-Sus board, Might give you a place to start, Me I am on the other side of town __________________ Please wipe your feet before walking all over me

07-10-08, 08:05 AM	#4 (permalink)
oceanboy Senior Member iTrader: (1) Join Date: Jan 2008 Posts: 1,030	How come it is always the LG TVs breaking

07-10-08, 08:21 AM	#5 (permalink)
Shibster Junior Member iTrader: (0) Join Date: Feb 2008 Posts: 23 Spent time on board: 13:26:44	Thanks for the reply gents. Does anyone have a Circuit Diagram Handy for this unit? So the Y-sus board goes faulty and draws down the P/S or the tv simply knows its faulty and doesnt allow it to startup?

07-10-08, 09:31 AM	#7 (permalink)
Shibster Junior Member iTrader: (0) Join Date: Feb 2008 Posts: 23 Spent time on board: 13:26:44	Can Anyone recomend a repairer close to Melbourne for this unit?

07-10-08, 01:17 PM	#9 (permalink)
Shibster Junior Member iTrader: (0) Join Date: Feb 2008 Posts: 23 Spent time on board: 13:26:44	So no ideas on a good repairer in Melbourne?

07-10-08, 01:26 PM	#11 (permalink)
Shibster Junior Member iTrader: (0) Join Date: Feb 2008 Posts: 23 Spent time on board: 13:26:44	Is it possible to purchase a Y-SUS Board from you and does it involve soldering or simple ribbon/multi strand leads?

07-10-08, 03:53 PM	#12 (permalink)
iwacelect Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 324 Spent time on board: 6 Days and 2:38:10	i've got a few good ones here, let me know if your interested and i'll dig one out for you! but if you want to get it to me then i'm closer than B4L....LOL __________________ When I explained to the guy what avatar I wanted, that wasn't what I meant!

07-10-08, 07:05 PM	#13 (permalink)
best4less I'am Not a Bloody Joke iTrader: (10) Join Date: Jan 2008 Location: Australia Posts: 2,618 Spent time on board: 1 Month, 4 Weeks, 0 Days and 12:30:26	Yeah postage would be the killer __________________ Please wipe your feet before walking all over me

07-10-08, 09:38 PM	#15 (permalink)
fandtm666 Premium Member iTrader: (19) Join Date: Jan 2008 Posts: 1,298	make sure if you do it yourself you have a good 1/2 dozen containers for all the different size screws and some time to do it.When i did mine took me 3 hrs pulling it apart to replace the three boards and being very carefull with the mini ribbon cables

08-10-08, 07:34 AM	#16 (permalink)
iwacelect Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 324 Spent time on board: 6 Days and 2:38:10	@fandtm666, mate we were doing 8 per day per tech at one stage, as far as the screws are concerned mate lg's are nothing, have you had the happy-happy joy-joy experience of dismantling a philips plasma..... mate you'd love to get back to a nice easy lg! heads up, bugger the mini cables themselves, they're not a prob... but watch out for the little connectors they go into... they're a real bugger... break that little brown locking clip off and your buggered! __________________ When I explained to the guy what avatar I wanted, that wasn't what I meant!

08-10-08, 01:59 PM	#18 (permalink)
iwacelect Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 324 Spent time on board: 6 Days and 2:38:10	not only that B4L, it's when taking apart a philips plasma i fell like a big kid at a party, and someone handed you a "pass the parcel" you rip off 1 coating of wrapper just to find another..... eg take the back off, now take the black surround with the ambi-lights off, now take off the gold frame... AND ALL THIS "JUST" TO GET TO THE BLOODY PCB'S, WOOH BE TIED IF YOUR DOING A PANEL.... why have you put down that screwdriver OOHHH we haven't finished yet!!!! __________________ When I explained to the guy what avatar I wanted, that wasn't what I meant!

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/electronics/11899-faulty-lg-50-rt-50pz45v.html
Posted By	For	Type	Date
Austech - Powered by vBulletin	This thread	Refback	07-10-08 10:07 PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode