Power supply info

**watchdog** · 03-07-08, 04:29 PM

I am looking for info on an E.A dual power supply. The unit I have is a Dick Smith Kit K3206. I bought this at an auction & while it appeared ok at the time , it is way out of calibration. So what I,m after is the setup proceedure & the board layout / component ID would be handy - thanks

**cjheath** · 05-10-08, 09:54 AM

I also recently bought a K3206 and it came with full instructions. I have no scanner but could photograph the pages if you still need them.

**watchdog** · 05-10-08, 05:22 PM

Mate - that would be great as long as I can read it

**cjheath** · 07-10-08, 09:36 PM

Quite readable (despite reflections) at900x1200, 11 pages, 2MB zipped.
Grab it while it remains at:

http://cjh.polyplex.org/electronics/...owerSupply.zip

I didn't build this, just bought it from an old ham.

**cjheath** · 12-10-08, 09:30 PM

It'd be nice to know if you picked this up and found it useful, before I take it down again.

03-07-08, 04:29 PM	#1 (permalink)
watchdog Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 209 Spent time on board: 3 Days and 3:40:54	Power supply info I am looking for info on an E.A dual power supply. The unit I have is a Dick Smith Kit K3206. I bought this at an auction & while it appeared ok at the time , it is way out of calibration. So what I,m after is the setup proceedure & the board layout / component ID would be handy - thanks __________________ Licenced security installer & Trainer

05-10-08, 09:54 AM	#2 (permalink)
cjheath Junior Member iTrader: (0) Join Date: Oct 2008 Posts: 3 Spent time on board: 2:08:21	Power Suply info I also recently bought a K3206 and it came with full instructions. I have no scanner but could photograph the pages if you still need them.

05-10-08, 05:22 PM	#3 (permalink)
watchdog Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 209 Spent time on board: 3 Days and 3:40:54	Mate - that would be great as long as I can read it __________________ Licenced security installer & Trainer

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/electronics/8097-power-supply-info.html
Posted By	For	Type	Date
Electronics on Austech.Info \| BoardReader	This thread	Refback	12-10-08 06:15 AM
Electronics [Archive] - Austech	This thread	Refback	11-07-08 11:27 PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-10-08, 09:36 PM	#4 (permalink)
cjheath Junior Member iTrader: (0) Join Date: Oct 2008 Posts: 3 Spent time on board: 2:08:21	Quite readable (despite reflections) at900x1200, 11 pages, 2MB zipped. Grab it while it remains at: http://cjh.polyplex.org/electronics/...owerSupply.zip I didn't build this, just bought it from an old ham.

12-10-08, 09:30 PM	#5 (permalink)
cjheath Junior Member iTrader: (0) Join Date: Oct 2008 Posts: 3 Spent time on board: 2:08:21	It'd be nice to know if you picked this up and found it useful, before I take it down again.

Sponsored Links