Page 13 of 98 FirstFirst ... 3456789101112131415161718192021222363 ... LastLast
Results 241 to 260 of 1948

Thread: The Chinese GPS Firmware Thread

  1. #241
    Junior Member
    Join Date
    Sep 2010
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Quote Originally Posted by dexex View Post
    @Tonto

    Can you connect to it using ActiveSync? If you do, using CeRegEditor (free, google for it), connect to the device's registry and delete:

    HKEY_LOCAL_MACHINEinitLaunch9999
    HKEY_LOCAL_MACHINEinitDepend9999

    Then reset the device and restore to factory settings. I had MioPocket installed too, but after the first reboot, it starting gooing in a loop: WinCE desktop -> MioPocket's first page (Favorites)->... I'm waiting for another device (I've sold mine), and I intend to try different unlockers / menus.

    I've already tried the ActiveSync, the program does not detect my device.
    Actually my GPS is serving only as a pen driver.

    Thanks for the tip. I regret that it did not work.

    But will have another alternative to recover it.



  • #242
    Junior Member
    Join Date
    Sep 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    My DIRET DT 580 CE6 128MB 800x480 no longer let starten.picture with Loadindikator SirVatlas V t.Switsch after a minute and reflected in starts against the loader Screen. Have tried the firmware from post # 69 (DT 560 to load), unfortunately without success. Please Help mi , Firmware for DT 580 128MB 800x480

  • #243
    Junior Member
    Join Date
    Sep 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    My gps stuck on splash screen and keeps restarting every few minutes.
    Device diret 560.
    Board pw53_v1.0
    Ap versiion 10423.1526.1516.QC82.MLC
    Os Version N100612E100612O1006251605
    Ram 128
    SIRFAtlas-V
    Firmware Pw53F_V1.0_E100612_128ZentelDDR_MLC_CH_800480_OS06 24538APP100403
    Screen resolution 800 * 480

    Any suggestions how i could bring it back to life?Maybe someone could share this firmware?

  • #244
    Junior Member AntBoy1979's Avatar
    Join Date
    Feb 2010
    Location
    Langwarrin, Victoria
    Age
    44
    Posts
    95
    Thanks
    6
    Thanked 26 Times in 16 Posts
    Rep Power
    177
    Reputation
    146

    Default

    From files downloaded from here there and everywhere I have put together a complete unbricker for

    YF units 82av4 and 82av6


    English WinCE6 with office apps
    red/black menu for 480x272 with 64MB RAM



    Works perfectly on my previously bricked YF82AV6.
    Now if I could only find the iPhone skin to suit.

  • The Following 2 Users Say Thank You to AntBoy1979 For This Useful Post:

    keng52 (15-02-11),sadiman (07-02-19)

  • #245
    Junior Member
    Join Date
    Sep 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Hi, this reply is for nomisreprah

    I notice he has a device with a YG902m v2.3 board inside

    A couple of days agio I bought a noname gps, with the same board inside.

    I promptly bricked it by installing miopocket.....DOH!

    But, found the firmware for the device here :



    Now This firmware has just unbricked my unit.

    So will it work on nomisreprah's unit as he has the same board ?

    The unit I have is 800x480 if that matters.

    HTH, Ian

  • #246
    Junior Member
    Join Date
    Sep 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Hello Stepselis
    Had the same Probleme.Have the manufacturer's firmware bekommen.
    Im root on microSD unzip.RESET on the device, firmware loading.
    Switsch OFF, and switch again and everything is working again.
    It is Firmware PW53F_V1.0_E100612 for DT-580 800x480 128MB CD 6.0

    Firmware Download
    Last edited by geribua; 15-09-10 at 08:23 AM.

  • #247
    Junior Member
    Join Date
    Jul 2010
    Posts
    10
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Rep Power
    0
    Reputation
    20

    Default Recalibration of GPS

    I have a problem with diret-560, 800*480, 128mb, manofacturer deno ltd., hongkong, no labels on GPS

    When I touch digitizer, point is placed somewhere else on the lcd, I need recalibrate but I cant get through menu.. The GPS is new, never used before.

    I tried firmware n100612e... no change
    I tried run out of battery (my pocket pc wants recalibratin after this)... no change
    Any help?

  • #248
    Junior Member
    Join Date
    Sep 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default Need help

    I have this GPS

    I want to upgrade firmware but when i reboot nothing heppend then i use YFormat.fmt and EraseReg.fmt and now i have these




    When i put SD with firmware GPS show startup image and nothing more happend

    P.S. i use (PA05、PA06、 PAO7、PA08/128MB/800×480) firmware

  • #249
    Junior Member
    Join Date
    Sep 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    I have

    I want to upgrade firmware but GPS did not react on SD whis firmware then i use YFormat.fmt and EraseReg.fmt and now i have these




    When i put SD with/without firmware GPS show startup image and nothing more happend

  • #250
    Junior Member shoppy's Avatar
    Join Date
    Aug 2010
    Location
    The Netherlands (Zwolle)
    Posts
    31
    Thanks
    3
    Thanked 5 Times in 4 Posts
    Rep Power
    167
    Reputation
    35

    Default

    Ok guy's,

    I just bought a new one to find out what type my 'bricked' one is.

    This is it:

    82F.2003.27M2584A
    V3.6.E9.10.21
    YFAtlas4
    ID 5955414E46454E47

    WinCE 6.0 english

    It is stuck on the welcome screen and whatever I do, it does not do anything.

    John

  • #251
    Junior Member
    Join Date
    Sep 2010
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Quote Originally Posted by haylocki View Post
    Hi, this reply is for nomisreprah

    I notice he has a device with a YG902m v2.3 board inside

    A couple of days agio I bought a noname gps, with the same board inside.

    I promptly bricked it by installing miopocket.....DOH!

    But, found the firmware for the device here :



    Now This firmware has just unbricked my unit.

    So will it work on nomisreprah's unit as he has the same board ?

    The unit I have is 800x480 if that matters.

    HTH, Ian

    Hi, thanks for the firmware, but I think I have totally bricked it, unit does nothing with firmware on sd card, tried reset and power, power only, touch screen and power, but nothing doing, just a black screen boo , thanks again, if you find out how to reflash this unit give us a message back thanks..

  • #252
    Junior Member
    Join Date
    Sep 2010
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    ok guys..update...I now have 2 gps units, A Myguide 3100 that wont go past the boot screen, and a japanese or chinese sat nav that used to be the same but I think I put a bootloader in there somewhere and now it is just a blank screen, I think the firmware above was the correct one but I think my sat nav is completely knackered, anyway, if anyone has any ideas where I can at least get a firmware for a Myguide 3100 that would be fantastic, by the way I have tried the DACH one that is available but it is wrong. thanks guys n girls..bye for now

  • #253
    Junior Member
    Join Date
    Sep 2010
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default the moral of this story is....

    Quote Originally Posted by NoService View Post
    With the YF GPS units the rar file will usually contain the following

    YFUpdate.exe (UPDATE UTILITY)
    yfospa06.img (OS - WINCE)
    YFAPP.WZP (DEVICE MENU)

    if your download contains

    BootPI06.bld or
    YFBtPI06.bld


    DELETE THEM!! THEY ARE BOOT LOADER FILES!!!

    putting those two files along with the others can and will permanently brick your device if they are the wrong type for your unit.

    if you just want to update the menu put

    YFUpdate.exe
    YFAPP.WZP

    on your card and update the menu

    if your stuck on the welcome screen a full flash is required and thus put yfospa06.img with the other two files.

    NS
    OK OK so yes I did leave these files on my sat nav...and yes I am an idiot..so I guess this is why it is not reading the SD card and not booting into anything anymore. I have tried everything, different .bld files, different eboot files, nuthin works, even stabbed it inside after losing my temper with it, so just to warn everybody..take note of what ppl tell you sometimes and it wont all end in tears (or knackered sat navs), maybe I can use it as a coaster from now on.
    On another note, anyone found out why my MYguide 3100 still stuck on load screen, it updates using the nk.bin, tinynk.bin, chain.bin and driver.bin files, havent found any that work yet. please let me know as it is quite a good unit and its the only one i have left, maybe another trip to ebay for a jap sat nav LOL.

  • #254
    Junior Member AntBoy1979's Avatar
    Join Date
    Feb 2010
    Location
    Langwarrin, Victoria
    Age
    44
    Posts
    95
    Thanks
    6
    Thanked 26 Times in 16 Posts
    Rep Power
    177
    Reputation
    146

    Default

    MTK GPS

    English WinCE 5 and Menu



    Uploaded with



    The menu file is safe to try ( GPSAPP.MSK )
    But only use the OS file ( XIP.NB0 ) on a bricked unit as I haven't the foggiest if it will brick your unit if it's the wrong one. The file naming is the same across all different MTK units and is difficult to differentiate Roms!

  • #255
    Junior Member
    Join Date
    Sep 2010
    Posts
    78
    Thanks
    0
    Thanked 21 Times in 18 Posts
    Rep Power
    170
    Reputation
    115

    Default

    Quote Originally Posted by shoppy View Post
    Ok guy's,

    I just bought a new one to find out what type my 'bricked' one is.

    This is it:

    82F.2003.27M2584A
    V3.6.E9.10.21
    YFAtlas4
    ID 5955414E46454E47

    WinCE 6.0 english

    It is stuck on the welcome screen and whatever I do, it does not do anything.

    John
    Same as my new one! I'll try not to mess with it ... too much! I want to see if it's possible to dump the ROM from it.

  • #256
    Junior Member shoppy's Avatar
    Join Date
    Aug 2010
    Location
    The Netherlands (Zwolle)
    Posts
    31
    Thanks
    3
    Thanked 5 Times in 4 Posts
    Rep Power
    167
    Reputation
    35

    Default

    Quote Originally Posted by dexex View Post
    Same as my new one! I'll try not to mess with it ... too much! I want to see if it's possible to dump the ROM from it.
    That would be great!

  • #257
    Junior Member
    Join Date
    Sep 2010
    Posts
    1
    Thanks
    0
    Thanked 1 Time in 1 Post
    Rep Power
    0
    Reputation
    15

    Default 82f firmware

    hello

    looks at you sometimes hir. my gps is working again with the new boot loader.

  • The Following User Says Thank You to treiberleiche For This Useful Post:

    shoppy (19-09-10)

  • #258
    Junior Member
    Join Date
    Sep 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    can someone help?I need firmware for ROM 32.bf.zw.8422 device with BT

  • #259
    Junior Member shoppy's Avatar
    Join Date
    Aug 2010
    Location
    The Netherlands (Zwolle)
    Posts
    31
    Thanks
    3
    Thanked 5 Times in 4 Posts
    Rep Power
    167
    Reputation
    35

    Default

    Quote Originally Posted by treiberleiche View Post
    hello

    looks at you sometimes hir. my gps is working again with the new boot loader.
    Ich liebe dich!!

    Great, I've got mine back up and running.
    Had to find the right menu but that was a peace of cake.

    This is realy a great forum guy's!

    a very happy Dutch Johnny
    Last edited by shoppy; 19-09-10 at 02:00 AM.

  • #260
    Junior Member
    Join Date
    Sep 2010
    Posts
    4
    Thanks
    0
    Thanked 1 Time in 1 Post
    Rep Power
    0
    Reputation
    15

    Default

    Quote Originally Posted by AntBoy1979 View Post
    MTK GPS

    English WinCE 5 and Menu



    Uploaded with



    The menu file is safe to try ( GPSAPP.MSK )
    But only use the OS file ( XIP.NB0 ) on a bricked unit as I haven't the foggiest if it will brick your unit if it's the wrong one. The file naming is the same across all different MTK units and is difficult to differentiate Roms!
    This worked on my gps from dealexteme;


    All I did was copy all the files to the root of the SD card and turned the device on. It then runs the firmware update.

    You can modify what is shown in the menus by changing the .xml file, this is useful to enable a 'wince' mode in the settings menu.]

    EDIT: May I ask where you found this firmware package?
    Last edited by mick.wheelz; 20-09-10 at 03:08 PM.

  • Page 13 of 98 FirstFirst ... 3456789101112131415161718192021222363 ... LastLast

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •