2pierre (29-05-11)
hi!
my unit is .
i update gps firmware from Zygo 10 on this post
and now i have my unit total silent. music not play from radio,dvd,usb/sd and dvb-t. music play only if gps is runing and touch on scren.
i have several firmwares and no working correct.
i have second firmware where radio,dvd,usb/sd and dvb-t go perfect,,music playing.. but my gps have on screen lattice-cube(is it not god resolution--i think)
please can anybody help me.I´m sad
thank!
Hi again. I have found the firmware I was looking for. However my GPS is bricked. It seems I cant flash the ROM as I cant reboot the GPS properly. The power button no longer switches the unit off and the reset seems to just suspend the unit until the power button is pressed. Any ideas on how to un brick ?
I bought two LH2000
First came with AtlasIV (AT8X0, AT840) CPU and works well with Garmin XT, iGo, OziExplorer.
Same sku.51323 ordered after two months and came with AtlasV (AT10X0A, AT550) CPU, and GPS applications run totally slow and freezes!!!
Is this possible, that AtlasV is simplified version of CPU or what? But applications stored in 64MB RAM is running well. Maybe it is slow transfer to/from SD Card? Updated with new firmware 82F.2214.36M2584Q and no success.
Thanks.
Last edited by msk_sk; 09-05-11 at 06:20 AM.
I sorted my problems with these chinese gps units.....I binned it and bought a tomtom
never again....
Last edited by davereap; 08-05-11 at 10:20 PM.
PF08.2020.29M7588H
V3.6.E60.12.22
English WinCE6
English menu
Instructions in the package to restore 6" 480x800 128Mb, 533MHz chinese GPS from Dealextreme sku 37914
Hello, please help me.
I read so many forums and etc, but I cant find, how to solve my problem;/
I have this GPS
WindowsCE5.0 -> control panel -> system:
general:
system:version 5.00 (build 1400),
computer:
processor type: MTK, ARM1176JZ-S-MT3351,
memory:58228 KB RAM
System Information:
Rom Version: V.13M.000000.101011.128M
APP Version: YECON-V1.2-BF-UI6-SD-EN
System ID:
E2010122 - 0A91229A
00000000 - 0000084B
And what I done?
"Old method (unsafe)"
and only this move "1) HKey_Local_Machine\init\Launch50
oldvalue YFLoader.exe # PvShell.exe in v2 unit
newvalue explorer.exe"
I renamed file "Launch50" from 'YFLoader.exe' to 'explorer.exe'.
before it shown normal gps desktop (like in photo), but now changed and shows WinCe5 desktop (I don't want it anymore).
sorry for bad english. I hope you understand what is the problem?
Last edited by xzgedaszx; 09-05-11 at 03:18 AM.
Hi, I have this gps unit with china maps.Which i'm trying to install tomtom with aus maps.
If anyone wants china maps let me know.
Thanks.
Rom Version : 82F.2214.23M7588H
Software Version :V3.6.Y064.12.06
OEM Info :YFAtlas4
Platform ID :0000000000000000
Windows Embedded CE 6.0
Brand : ICHI K5 GPS 4GB 5inch screen
Last edited by Techlover; 09-05-11 at 05:08 AM.
Hi for all
Thank you for helping us
I tried everything that is 7 INCH 800 * 480
From the link
and All posts in this forum many page 1 and up to 40
Because my experience very few result was the loss of the system
When you press the power button does not open the device only after the usb mode is no longer showing only a white screen with the word HYUNDAI
Note that the device information is
Rom version V.18D.A40001.100802.4G
APP Version V1.2.21.10.08.04
system ID 20100701-00000000-20100701-A5001D56
Please anyone who can help me
Thank in advance
Last edited by aldibiki; 09-05-11 at 01:41 PM.
Uploaded with
Hi, i want your help for my new Chinese gps.
It works fine and i don't have any problems.
I want to make a full backup including rom,navigation program.......in case of future malfunction.
Can you tell me how to do this?
Thanks!
JPYZFR1
Last edited by JPYZFR1; 09-05-11 at 09:43 PM.
Hi for all
Thank you for helping us
I tried everything that is 7 INCH 800 * 480
From the link
and All posts in this forum many page 1 and up to 40
Because my experience very few result was the loss of the system
When you press the power button does not open the device only after the usb mode is no longer showing only a white screen with the word HYUNDAI
Note that the device information is
YG-918D-V1.1
Rom version V.18D.A00001.100802.4G
APP Version V1.3.01.10.08.03
system ID 20100701-00000000-20100701-A5001D56
Please anyone who can help me
Thank in advance
the links in the first page is not avaible...any source?
Alguien en español?
Thanks ¡¡
Dear NoService
The Senior Member
The device to not respond for USB
But after pressing the RESET button responds to charge the battery
Clicking on the play button a white screen appears with the word
HYUNDAI remains the screen and
Do not see SDMMC
Device
Model:YG-918D-FSJ-4GI
OS:V.18D.A00001.100802.4G
AP Version V1.3.01.10.08.03
WG1002-1
system ID 20100805007
YG-918D-V1.1
2010-6-30
Thanks
Dear
The device to not respond for USB
But after pressing the RESET button responds to charge the battery
Clicking on the play button a white screen appears with the word
HYUNDAI remains the screen and
Do not see SDMMC
Device
Model:YG-918D-FSJ-4GI
OS:V.18D.A00001.100802.4G
AP Version V1.3.01.10.08.03
WG1002-1
system ID 20100805007
YG-918D-V1.1
2010-6-30
Thanks
hey just not sure how to go about fixing and wat firm i should use...
that is the unit i have and the problem i have is wen i hit the navi button i get the load screen and either..
1) freezes on that screen
2)opens to this screen then i get no navigation software found and cant go any further
after reading alot of different threads i want to make sure i get the right firmware and instructions so i dont brick my unit if it is not already..
any help would be great thanks
Dear NoService
The Senior Member
The device to not respond for USB
But after pressing the RESET button responds to charge the battery
Clicking on the play button a white screen appears with the word
HYUNDAI remains the screen and
Do not see SDMMC
Device
Model:YG-918D-FSJ-4GI
OS:V.18D.A00001.100802.4G
AP Version V1.3.01.10.08.03
WG1002-1
system ID 20100805007
YG-918D-V1.1
2010-6-30
Thanks
@aldibiki
Format the SD Card with a FAT16 or FAT32 filesystem. Copy the contents of the archive to the SD Card, insert and restart. If the device it's charging, make sure it's fully charged. Hope it works!
Code:
parovzsv8 (15-05-11)
Bookmarks