Which Clip/chip to install ?

**myf360f1** · 21-09-08, 09:36 AM

Hi all,

I am a little confused about which chip to use on my daughters WII. I have read the other threads and have also checked out some chip suppliers recommendations on their sites. My unit has the serial LAH 1051XXXXXX and one sites suggests I use a D2C2 version 2 chip and the other says DCpro. I am wanting to use a Clip as my soldering skills are poor

, and I understand that some people are not keen on them, but I thought I'd have a bash.

Your input is greatly apreciated.

**cwispy** · 21-09-08, 10:13 PM

Just get a D2Pro d2e version (which they pretty well all should be now anyway) and you will be set no matter what chipset is in the Wii.

**nsdn** · 21-09-08, 10:21 PM

yup, just be aware if your chipset is D2C or D2C2 you should prolly reprogram the chip with the firmware on the d2pro website....blue sticker is fine with d2e tho

**cwispy** · 21-09-08, 10:24 PM

No need to reflash them anymore if they are the new batch nsdn. All the new ones which I have been getting have been fine with all chipsets. It was only some old batches which seem to have that issue.

**myf360f1** · 22-09-08, 07:30 AM

Hi Cwispy and nsdn,

Thank you very much, that eliminates any confusion

**Ljay** · 22-09-08, 05:29 PM

If u want a permanent solution ditch the clip & get someone to instal it for you...not much difference between cost of the clip & labor to instal

**angelinalove** · 01-10-08, 10:18 PM

only D2Pro d2e version

**myf360f1** · 12-10-08, 02:08 PM

Quick update, took your advice cwispy and installed the new 9 wire D2Pro DSE chip or should I say had it installed.

Cheers

**cwispy** · 12-10-08, 02:33 PM

Good stuff mate. You wont have any problems with that chip.

21-09-08, 09:36 AM	#1 (permalink)
myf360f1 Still Learning iTrader: (24) Join Date: Jan 2008 Location: Melbourne Posts: 690 Spent time on board: 1 Week, 6 Days and 13:34:03	Which Clip/chip to install ? Hi all, I am a little confused about which chip to use on my daughters WII. I have read the other threads and have also checked out some chip suppliers recommendations on their sites. My unit has the serial LAH 1051XXXXXX and one sites suggests I use a D2C2 version 2 chip and the other says DCpro. I am wanting to use a Clip as my soldering skills are poor , and I understand that some people are not keen on them, but I thought I'd have a bash. Your input is greatly apreciated.

21-09-08, 10:13 PM	#2 (permalink)
cwispy Premium Member iTrader: (12) Join Date: Jan 2008 Posts: 630	Just get a D2Pro d2e version (which they pretty well all should be now anyway) and you will be set no matter what chipset is in the Wii. __________________ Business Web, Email, SQL hosting and Online Backup services available. http://www.2000cn.com.au Wii, Xbox, Xbox 360, PS2, PS3 mods and repairs http://www.ausmodchips.com or PM me for further details

21-09-08, 10:21 PM	#3 (permalink)
nsdn www.modspace.com.au iTrader: (0) Join Date: Jan 2008 Posts: 127 Spent time on board: 1 Day and 22:36:49	yup, just be aware if your chipset is D2C or D2C2 you should prolly reprogram the chip with the firmware on the d2pro website....blue sticker is fine with d2e tho __________________ PS2 & PSP, Nintendo Wii, Xbox and Xbox 360 Repairs and Modifications. High Definition Media Players 1080P NMT Call Craig on 0406 650 289 or visit my website at www.modspace.com.au Life time Warranty on all Chips and Workmanship

21-09-08, 10:24 PM	#4 (permalink)
cwispy Premium Member iTrader: (12) Join Date: Jan 2008 Posts: 630	No need to reflash them anymore if they are the new batch nsdn. All the new ones which I have been getting have been fine with all chipsets. It was only some old batches which seem to have that issue. __________________ Business Web, Email, SQL hosting and Online Backup services available. http://www.2000cn.com.au Wii, Xbox, Xbox 360, PS2, PS3 mods and repairs http://www.ausmodchips.com or PM me for further details

22-09-08, 05:29 PM	#6 (permalink)
Ljay Premium Member iTrader: (0) Join Date: Feb 2008 Posts: 135 Spent time on board: 20:51:02	If u want a permanent solution ditch the clip & get someone to instal it for you...not much difference between cost of the clip & labor to instal __________________ PS2,PSP,Gamecube,Wii,Xbox,Xbox360 Console Mods & Repairs. All work done by qualified Technician.Free Quotes. Email: precision_mods@hotmail.com Ph:0407-833360

22-09-08, 07:30 AM	#5 (permalink)
myf360f1 Still Learning iTrader: (24) Join Date: Jan 2008 Location: Melbourne Posts: 690 Spent time on board: 1 Week, 6 Days and 13:34:03	Hi Cwispy and nsdn, Thank you very much, that eliminates any confusion

01-10-08, 10:18 PM	#7 (permalink)
angelinalove Junior Member iTrader: (0) Join Date: Jul 2008 Posts: 15 Spent time on board: 1:20:16	only D2Pro d2e version

12-10-08, 02:08 PM	#8 (permalink)
myf360f1 Still Learning iTrader: (24) Join Date: Jan 2008 Location: Melbourne Posts: 690 Spent time on board: 1 Week, 6 Days and 13:34:03	Quick update, took your advice cwispy and installed the new 9 wire D2Pro DSE chip or should I say had it installed. Cheers

12-10-08, 02:33 PM	#9 (permalink)
cwispy Premium Member iTrader: (12) Join Date: Jan 2008 Posts: 630	Good stuff mate. You wont have any problems with that chip. __________________ Business Web, Email, SQL hosting and Online Backup services available. http://www.2000cn.com.au Wii, Xbox, Xbox 360, PS2, PS3 mods and repairs http://www.ausmodchips.com or PM me for further details

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/nintendo/11327-clip-chip-install.html
Posted By	For	Type	Date
Nintendo [Archive] - Austech	This thread	Refback	15-12-08 01:16 PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

Sponsored Links

Sponsored Links