wii wants to upgrade.

**mxd** · 21-07-08, 08:20 PM

Hi all,

I went to play "Fire emblem radiant dawn" ( I just got from a nice gent in disc trader) and it wants to upgrade my wii, I did not allow it (as I am petrified of bricking it). I went to options and did an upgrade to find out I have the latest but the game still wants to update me, is there a way to find out what, any one have any ideas of what I could try etc..

thanks
Matt

**nsdn** · 21-07-08, 09:20 PM

Update it off the net, then try again, or if its a PAL version then your fine anyways

**shagga66** · 21-07-08, 10:54 PM

Yeah if you know 100% that its a PAL disc then let it do it. I always go by that rule, if I am not 100% sure then I dont run it.
As nsdn said, make sure you have the latest update from Nintendo as well.

Also what chip do you have in your Wii...???
If by chance you have a Wiikey, update it to the latest firmware 1.9s and the run the config disc and disable "updates via DVD" in the menu. Not sure if this option is available on other chips though.

Shagga

**nestyle** · 22-07-08, 12:03 AM

If u have a iso image of the game u could patch it with WiiBrickBlocker & then burn it again. then the game should start without an update.

**mxd** · 22-07-08, 07:27 AM

thanks, I have updated from the net (I have the latest) but the disk still wants to update, I will try wiibrickblocker and see what happens

cheers
Matt

**Jaz808** · 22-07-08, 12:10 PM

Super Smash Bros update was to allow reading of Dual Layer,
Speed Racer wanted to update so i chanced it at that was fine
So far i have been lucky

**nsdn** · 22-07-08, 11:20 PM

I have read that once your firmware is past 3.00 then your OK anyway, it seems like every NTSC game you out in wants a update regardless of your firmware revision, even with a disk that was supposedly scrubbed.

I very nervously bit the bullet the other day and updated with a NTSC US version and it was fine. Mine was already at 3.01E...but it did not change the firmware version!! It just seemed like the game wanted to add some stuff to NV memory.

I tell customers not to update with out of region disks as a precaution and because I can't afford to say anything else, but it would seem that what I have read is true at least for the game I updated with.

Sorry can't give a definitive reassurance.

**mxd** · 23-07-08, 07:41 AM

thanks.

I spoke to the gent that I got the game off, he said it is a PAL, he was a wiiKey and has updates turned off, I have a new console so it has the dc-pro chip (or something like that), still a bit nervous as I've only had the console 3 weeks, I think I will brickclock it.

What do people use to create iso's, any freebies that are good, I went to channel BT but could not find anything (my nero want create iso) ?

thanks
Matt

**hrt5000** · 23-07-08, 08:45 AM

Quote:

Originally Posted by mxd

thanks.

I spoke to the gent that I got the game off, he said it is a PAL, he was a wiiKey and has updates turned off, I have a new console so it has the dc-pro chip (or something like that), still a bit nervous as I've only had the console 3 weeks, I think I will brickclock it.

What do people use to create iso's, any freebies that are good, I went to channel BT but could not find anything (my nero want create iso) ?

thanks
Matt

use imgburn to create and burn the iso

**mxd** · 23-07-08, 07:42 PM

thanks for all the help,

I created an iso then brickblocker on it, brickblocer stated it was Region P (Pal/Europe) so I assume this is safe to le upgrade as it's pal even though it's Europe ?

thanks again

Matt

21-07-08, 08:20 PM	#1 (permalink)
mxd Premium Member iTrader: (4) Join Date: Feb 2008 Posts: 71 Spent time on board: 3 Days and 5:09:00	wii wants to upgrade. Hi all, I went to play "Fire emblem radiant dawn" ( I just got from a nice gent in disc trader) and it wants to upgrade my wii, I did not allow it (as I am petrified of bricking it). I went to options and did an upgrade to find out I have the latest but the game still wants to update me, is there a way to find out what, any one have any ideas of what I could try etc.. thanks Matt

21-07-08, 09:20 PM	#2 (permalink)
nsdn www.modspace.com.au iTrader: (0) Join Date: Jan 2008 Posts: 127 Spent time on board: 1 Day and 22:36:49	Update it off the net, then try again, or if its a PAL version then your fine anyways __________________ PS2 & PSP, Nintendo Wii, Xbox and Xbox 360 Repairs and Modifications. High Definition Media Players 1080P NMT Call Craig on 0406 650 289 or visit my website at www.modspace.com.au Life time Warranty on all Chips and Workmanship

22-07-08, 11:20 PM	#7 (permalink)
nsdn www.modspace.com.au iTrader: (0) Join Date: Jan 2008 Posts: 127 Spent time on board: 1 Day and 22:36:49	I have read that once your firmware is past 3.00 then your OK anyway, it seems like every NTSC game you out in wants a update regardless of your firmware revision, even with a disk that was supposedly scrubbed. I very nervously bit the bullet the other day and updated with a NTSC US version and it was fine. Mine was already at 3.01E...but it did not change the firmware version!! It just seemed like the game wanted to add some stuff to NV memory. I tell customers not to update with out of region disks as a precaution and because I can't afford to say anything else, but it would seem that what I have read is true at least for the game I updated with. Sorry can't give a definitive reassurance. __________________ PS2 & PSP, Nintendo Wii, Xbox and Xbox 360 Repairs and Modifications. High Definition Media Players 1080P NMT Call Craig on 0406 650 289 or visit my website at www.modspace.com.au Life time Warranty on all Chips and Workmanship

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/nintendo/8873-wii-wants-upgrade.html
Posted By	For	Type	Date
Austech - Powered by vBulletin	This thread	Refback	24-07-08 08:05 PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

21-07-08, 10:54 PM	#3 (permalink)
shagga66 Super Moderator iTrader: (5) Join Date: Jan 2008 Location: Melbourne Posts: 545	Yeah if you know 100% that its a PAL disc then let it do it. I always go by that rule, if I am not 100% sure then I dont run it. As nsdn said, make sure you have the latest update from Nintendo as well. Also what chip do you have in your Wii...??? If by chance you have a Wiikey, update it to the latest firmware 1.9s and the run the config disc and disable "updates via DVD" in the menu. Not sure if this option is available on other chips though. Shagga

22-07-08, 12:03 AM	#4 (permalink)
nestyle Junior Member iTrader: (2) Join Date: Jan 2008 Posts: 13 Spent time on board: 2 Days and 7:22:04	If u have a iso image of the game u could patch it with WiiBrickBlocker & then burn it again. then the game should start without an update.

22-07-08, 07:27 AM	#5 (permalink)
mxd Premium Member iTrader: (4) Join Date: Feb 2008 Posts: 71 Spent time on board: 3 Days and 5:09:00	thanks, I have updated from the net (I have the latest) but the disk still wants to update, I will try wiibrickblocker and see what happens cheers Matt

22-07-08, 12:10 PM	#6 (permalink)
Jaz808 Senior Member iTrader: (0) Join Date: Jan 2008 Location: Hell Posts: 295 Spent time on board: 4 Days and 23:45:44	Super Smash Bros update was to allow reading of Dual Layer, Speed Racer wanted to update so i chanced it at that was fine So far i have been lucky

23-07-08, 07:41 AM	#8 (permalink)
mxd Premium Member iTrader: (4) Join Date: Feb 2008 Posts: 71 Spent time on board: 3 Days and 5:09:00	thanks. I spoke to the gent that I got the game off, he said it is a PAL, he was a wiiKey and has updates turned off, I have a new console so it has the dc-pro chip (or something like that), still a bit nervous as I've only had the console 3 weeks, I think I will brickclock it. What do people use to create iso's, any freebies that are good, I went to channel BT but could not find anything (my nero want create iso) ? thanks Matt

23-07-08, 07:42 PM	#10 (permalink)
mxd Premium Member iTrader: (4) Join Date: Feb 2008 Posts: 71 Spent time on board: 3 Days and 5:09:00	thanks for all the help, I created an iso then brickblocker on it, brickblocer stated it was Region P (Pal/Europe) so I assume this is safe to le upgrade as it's pal even though it's Europe ? thanks again Matt

Sponsored Links

Sponsored Links

Sponsored Links