Irdeto P/N 901275 Rev 1.0 upgrade to 2.26b

**LeroyPatrol** · 28-08-08, 01:58 PM

Hello Everyone,

I have an Irdeto cam P/N 901275 Rev 1.0 that I want to upgrade to 2.26b using the file from the following link
SmarDTV
I have upgraded a few 901275 Rev 1.1 cams with success but this Rev 1.0 gives the following error:

Module answered with error code = 90 01
Blocks send 5
Download prodedure failed

Has anyone had any success upgrading the Rev 1.0 cam?

TIA.......Leroy

**Sanity** · 29-08-08, 08:23 AM

Anyone ? The cam is mine and Leroy offered to flash it for me , but it seems there is a difference between revision 1.0 and 1.1. We are both curious as to why it wont upgrade and if anyone else has tried the same thing and whether they had any success or not.

Thanks in advance for any replies

**cwispy** · 29-08-08, 02:26 PM

Maybe it needs to have the 1.1 update put on before it will update to the latest firmware? However I have heard that those cams can only be updated once and thats it. Personally I dont know why they would limit the update to only once, but it could be done I suppose.

**LeroyPatrol** · 29-08-08, 07:34 PM

Quote:

Originally Posted by cwispy

Maybe it needs to have the 1.1 update put on before it will update to the latest firmware? However I have heard that those cams can only be updated once and thats it. Personally I dont know why they would limit the update to only once, but it could be done I suppose.

thanks for that. That may be the only option to try.

Leroy

**LeroyPatrol** · 29-08-08, 08:26 PM

Quote:

Originally Posted by Sanity

Anyone ? The cam is mine and Leroy offered to flash it for me , but it seems there is a difference between revision 1.0 and 1.1. We are both curious as to why it wont upgrade and if anyone else has tried the same thing and whether they had any success or not.

Thanks in advance for any replies

Gee I was hoping people would help 'with out the boss looking over my shoulder' lol. Now when people reply I won't know if it's becasue they want to help me or because 'the boss' is looking!!

Leroy

**Sanity** · 13-09-08, 10:54 AM

Unfortunately we had to give up on this as all options were exhausted. Many thanks to Leroy who went far beyond the call of a favour in trying to upgrade this cam.

Leroy....I'm not the boss anymore , thats why we arent getting replies

Thanks for your efforts I'll retire it to the sat cupboard , who knows it may work in the future.

**LeroyPatrol** · 13-09-08, 07:02 PM

Quote:

Originally Posted by Sanity

Unfortunately we had to give up on this as all options were exhausted. Many thanks to Leroy who went far beyond the call of a favour in trying to upgrade this cam.

Leroy....I'm not the boss anymore , thats why we arent getting replies

Thanks for your efforts I'll retire it to the sat cupboard , who knows it may work in the future.

no dramas....always up for a challenge!!

Leroy

**Krueger** · 14-09-08, 10:33 AM

Quote:

Originally Posted by conan_oz

Thanks Superior, that update worked well with my blue 901275.I had to try 4 laptops before one would work.

If when you insert the CI card into the PCMCIA slot on the laptop and it is detected as a "PCMCIA-MTD-002" then the sofware will not work on that laptop without a CAM adapter ( what ever that is )

Working well in my Humax and Dream 7020 now.

I also tried a blue 901633 which would not work, does anyone know if the 901633 can be updated?

Thanks

This may or may not be relevant, but there might be some info here for you.

Irdeto 2.26 purple cam?

**Luck Duck** · 29-09-08, 04:04 PM

I have an an Irdeto cam P/N 901275 Rev 1.1 and would also like to update cam so as to use sellers card on Emtech200. I have downloaded the SmarTools cam updater irdeto1_12_11.zip from SmarDTV but how do I flash the cam??

**LeroyPatrol** · 29-09-08, 04:10 PM

Quote:

Originally Posted by Luck Duck

I have an an Irdeto cam P/N 901275 Rev 1.1 and would also like to update cam so as to use sellers card on Emtech200. I have downloaded the SmarTools cam updater irdeto1_12_11.zip from SmarDTV but how do I flash the cam??

Unzip it and have a read. Your biggest challenge is finding a laptop that's happy with the cam that you can load the driver on.

Leroy

**Luck Duck** · 29-09-08, 04:34 PM

Quote:

Originally Posted by LeroyPatrol

Unzip it and have a read. Your biggest challenge is finding a laptop that's happy with the cam that you can load the driver on.

Leroy

Thanks Leroypatrol, I have read the pdf tried the cam in my laptop and seems I need a cam extender. Where do you get one of those and how much?

Luck Duck

**LeroyPatrol** · 29-09-08, 05:08 PM

Quote:

Originally Posted by Luck Duck

Thanks Leroypatrol, I have read the pdf tried the cam in my laptop and seems I need a cam extender. Where do you get one of those and how much?

Luck Duck

Find a laptop that doesn't require that extender board and you'll be right then.

Leroy

**Luck Duck** · 29-09-08, 06:42 PM

Quote:

Originally Posted by LeroyPatrol

Find a laptop that doesn't require that extender board and you'll be right then.

Leroy

Ok, I dug out my old Sony vio notebook and shoved the cam in and it recognised it

Followed instructions and updated the cam. Tried it out in the Emtech200 and now whitey works like a charm

Luck Duck

**LeroyPatrol** · 29-09-08, 07:35 PM

Quote:

Originally Posted by Luck Duck

Ok, I dug out my old Sony vio notebook and shoved the cam in and it recognised it

Followed instructions and updated the cam. Tried it out in the Emtech200 and now whitey works like a charm

Luck Duck

I love it when a plan comes together

Leroy

**Hannible** · 01-10-08, 12:11 PM

Quote:

Originally Posted by Luck Duck

Ok, I dug out my old Sony vio notebook and shoved the cam in and it recognised it

Followed instructions and updated the cam. Tried it out in the Emtech200 and now whitey works like a charm

Luck Duck

hi There,

What O/S are you driving in that lappy?

cheers
hannible

**Luck Duck** · 01-10-08, 04:08 PM

Quote:

Originally Posted by Hannible

hi There,

What O/S are you driving in that lappy?

cheers
hannible

Windows 2000

Luck Duck

**Hannible** · 01-10-08, 06:23 PM

Quote:

Originally Posted by Luck Duck

Windows 2000

Luck Duck

Cheers for that LD, i must have grief with w2k, mine wont even recognise the cam or anything else i shove in the PCMCIA slots (acer TM730tx).
back to the drawing board for me then.

cheers
hannible

**Hannible** · 02-10-08, 10:54 AM

yeah, stuff it - anyone know where i can get my grubby mits on a USB powered PCMCIA reader/writer?

What they be worth?

cheers
hannible.

**Luck Duck** · 03-10-08, 01:13 PM

Quote:

Originally Posted by Hannible

yeah, stuff it - anyone know where i can get my grubby mits on a USB powered PCMCIA reader/writer?

What they be worth?

cheers
hannible.

Try hear but expensive. Addonics Pocket Ultra DigiDrive - USB V2.0, 1 x PCMCIA Slot BITS Pty Limited

**LeroyPatrol** · 03-10-08, 01:46 PM

Quote:

Originally Posted by Hannible

yeah, stuff it - anyone know where i can get my grubby mits on a USB powered PCMCIA reader/writer?

What they be worth?

cheers
hannible.

It's not guaranteed that type of reader would work with cams. I'd be looking at a good old laptop. You could be throwing $$$$ away.

Leroy

28-08-08, 01:58 PM	#1 (permalink)
LeroyPatrol Merry Xmas Happy New Year iTrader: (14) Join Date: Jan 2008 Posts: 2,766 Spent time on board: 2 Months, 0 Weeks, 1 Day and 18:24:58	Irdeto P/N 901275 Rev 1.0 upgrade to 2.26b Hello Everyone, I have an Irdeto cam P/N 901275 Rev 1.0 that I want to upgrade to 2.26b using the file from the following link SmarDTV I have upgraded a few 901275 Rev 1.1 cams with success but this Rev 1.0 gives the following error: Module answered with error code = 90 01 Blocks send 5 Download prodedure failed Has anyone had any success upgrading the Rev 1.0 cam? TIA.......Leroy

29-08-08, 02:26 PM	#3 (permalink)
cwispy Premium Member iTrader: (12) Join Date: Jan 2008 Posts: 630	Maybe it needs to have the 1.1 update put on before it will update to the latest firmware? However I have heard that those cams can only be updated once and thats it. Personally I dont know why they would limit the update to only once, but it could be done I suppose. __________________ Business Web, Email, SQL hosting and Online Backup services available. http://www.2000cn.com.au Wii, Xbox, Xbox 360, PS2, PS3 mods and repairs http://www.ausmodchips.com or PM me for further details

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/other-hardware/10415-irdeto-p-n-901275-rev-1-0-upgrade-2-26b.html
Posted By	For	Type	Date
pcmcia mtd 0002 \| BoardReader	This thread	Refback	29-09-08 09:30 PM
Other Hardware on Austech.Info \| BoardReader	This thread	Refback	15-09-08 03:53 AM
Irdeto - forums post summary \| BoardReader	This thread	Refback	02-09-08 04:39 PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

29-08-08, 08:23 AM	#2 (permalink)
Sanity Super Moderator iTrader: (5) Join Date: Jan 2008 Location: Victoria Posts: 3,042	Anyone ? The cam is mine and Leroy offered to flash it for me , but it seems there is a difference between revision 1.0 and 1.1. We are both curious as to why it wont upgrade and if anyone else has tried the same thing and whether they had any success or not. Thanks in advance for any replies

13-09-08, 10:54 AM	#6 (permalink)
Sanity Super Moderator iTrader: (5) Join Date: Jan 2008 Location: Victoria Posts: 3,042	Unfortunately we had to give up on this as all options were exhausted. Many thanks to Leroy who went far beyond the call of a favour in trying to upgrade this cam. Leroy....I'm not the boss anymore , thats why we arent getting replies Thanks for your efforts I'll retire it to the sat cupboard , who knows it may work in the future.

29-09-08, 04:04 PM	#9 (permalink)
Luck Duck Member iTrader: (0) Join Date: Jan 2008 Posts: 44 Spent time on board: 15:57:36	I have an an Irdeto cam P/N 901275 Rev 1.1 and would also like to update cam so as to use sellers card on Emtech200. I have downloaded the SmarTools cam updater irdeto1_12_11.zip from SmarDTV but how do I flash the cam??

02-10-08, 10:54 AM	#18 (permalink)
Hannible Member iTrader: (0) Join Date: Jan 2008 Location: Esperance WA Posts: 34 Spent time on board: 12:12:45	yeah, stuff it - anyone know where i can get my grubby mits on a USB powered PCMCIA reader/writer? What they be worth? cheers hannible.

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links