TechniSat Skystar 2 PCI sat cards.

**covert** · 07-01-08, 08:57 AM

Looking to get some SkyStar 2 cards since there supported well under linux. Anyone able to tell me where to get them from in Australia ?

**SPLog** · 08-01-08, 12:31 AM

Two sites I know off (both Austech members)

Sattronics - (madcow)
SatTronics

EuroDigital - (basque)
Skystar 2 Special Edition EuroDigital

**tagg** · 08-01-08, 05:49 AM

yea check basque out he's a cool guy i got one those of him no problems works well.

Tagg

**covert** · 08-01-08, 06:55 AM

Thanks. I will give EuroDigital a shot. I would prefer to not deal with SatTronics unless I had no other options.

**novica** · 15-01-08, 05:33 PM

yep.....Basque is good...i bought a ss2 just the other day of him

**jimbo123** · 11-02-08, 09:34 AM

Can the card referred to above be:
- used as a CS client ?
- integrated into a MythTV setup?

I recall asking similar questions here 'before the crash', but never saved the advice. Anyone on here have a Myth setup with a DVB-S support ?

I'd like to add a suitable DVB-S card to my current Myth setup to use with C1, rather than having a Dream sitting next to the Myth frontend.

Thanks,

Jim.....

**covert** · 11-02-08, 01:09 PM

Quote:

Originally Posted by jimbo123

Can the card referred to above be:
- used as a CS client ?
- integrated into a MythTV setup?

I recall asking similar questions here 'before the crash', but never saved the advice. Anyone on here have a Myth setup with a DVB-S support ?

I'd like to add a suitable DVB-S card to my current Myth setup to use with C1, rather than having a Dream sitting next to the Myth frontend.

Thanks,

Jim.....

1) A DVB-S card has nothing to do with a CS client.

2) This card does work with MythTV.

Problem with MythTV is they don't supports softcam's for legal reasons, so any softcam you get running needs to be done with some unsupported hacks/patchs to mythTV

**jimbo123** · 11-02-08, 01:34 PM

Ah ok,.... fair enough.

I'd assume then that Myth would have to be built from source and patched appropriately to get softcam support.

Any links would be appreciated,..

Thanks,

Jim.....

**fromaron** · 11-02-08, 02:30 PM

Quote:

Originally Posted by jimbo123

Ah ok,.... fair enough.

I'd assume then that Myth would have to be built from source and patched appropriately to get softcam support.

Any links would be appreciated,..

Thanks,

Jim.....

Do DVBN or happysat google search, you'll get all your answers.

**jimbo123** · 11-02-08, 03:18 PM

Quote:

Originally Posted by fromaron

Do DVBN or happysat google search, you'll get all your answers.

Will do,.. thanks

**jimbo123** · 11-02-08, 11:37 PM

So is Sasc-NG what I am looking for ? To provide/build a virtual adaptor based on a working DVB-S adaptor ? I've read in one place where they patch Myth but read elsewhere and there was no mention of messing with Myth.

And then select the virtual adaptor within Myth.

Is there anyone here that has done this? And are happy with their setup?

Is the DVB-S card referred to above OK for this task,.. or is an alternate one recommended?

Thanks,

Jim.....

**jeff188** · 06-03-08, 12:32 PM

> Is the DVB-S card referred to above OK for this task,.. or is an alternate one recommended?

The following Geniatech cards can be found quite cheaply from OS, work very well with recent kernels and allow loop thru for more than one card:

TV Products Expert

**jimbo123** · 06-03-08, 02:45 PM

Quote:

Originally Posted by jeff188

> Is the DVB-S card referred to above OK for this task,.. or is an alternate one recommended?

The following Geniatech cards can be found quite cheaply from OS, work very well with recent kernels and allow loop thru for more than one card:

TV Products Expert

Thanks for the reply,.. will keep them in mind. For the moment I bought this Skystar 2 card.

Hopefully have it tomorrow,...

Jim.....

**Phillip James** · 04-07-08, 11:09 AM

Quote:

Originally Posted by SPLog

Two sites I know off (both Austech members)

Sattronics - (madcow)
SatTronics

EuroDigital - (basque)
Skystar 2 Special Edition EuroDigital

SPLog,

No mention of Skystar on the Satronic site and www.eurodigital.com.au appears dead..............any help appreciated, I still want to buy a card.

Regards,

**covert** · 04-07-08, 12:01 PM

I ended up getting some Digiwave 103G cards. They work out of the box with current linux kernel. They have an antenna out that is some advantage for logging with an additional box/card. Only downfall is the driver for IR receiver needs to be patched into the source code and compiled. I had no need for the IR receiver since I also have a dvb-t usb stick with working out of the box IR drivers.

I got them from Hypermegasat.com $61.89 USD per card + $34.16 USD for shipping of 4 units.

[edit] I run 2 of these cards with Mythbuntu. Sasc-ng hg618 does the decryption for me. Connects to a newcs server. Cards can do multiple channels on the same transponder at the same time. Have not tried with HDTV streams since I don't have access to them but I cannot see why it would not spit out a dvb-s hd stream since it is just another data stream. Bandwidth is not a problem since it does multiple dvb-s sd streams at the same time.

[edit2] I dealt directly with Hypermegasat via email. They issued me a paypal invoice as soon as we had worked out the shipping. Response via email was the best I have ever had with a online store.

**SPLog** · 04-07-08, 08:17 PM

Sorry Phillip, I'm not of any help as I think eurodigital closed shop, and Sattronics don't carry them anymore.

Not sure who carries them.

**Phillip James** · 07-07-08, 09:17 PM

Gentlemen,

Thanks for your help so far..............still looking and thinking.

Regards,

07-01-08, 08:57 AM	#1 (permalink)
covert Premium Member iTrader: (9) Join Date: Jan 2008 Location: My Imagination Posts: 726	TechniSat Skystar 2 PCI sat cards. Looking to get some SkyStar 2 cards since there supported well under linux. Anyone able to tell me where to get them from in Australia ?

04-07-08, 12:01 PM	#15 (permalink)
covert Premium Member iTrader: (9) Join Date: Jan 2008 Location: My Imagination Posts: 726	I ended up getting some Digiwave 103G cards. They work out of the box with current linux kernel. They have an antenna out that is some advantage for logging with an additional box/card. Only downfall is the driver for IR receiver needs to be patched into the source code and compiled. I had no need for the IR receiver since I also have a dvb-t usb stick with working out of the box IR drivers. I got them from Hypermegasat.com $61.89 USD per card + $34.16 USD for shipping of 4 units. [edit] I run 2 of these cards with Mythbuntu. Sasc-ng hg618 does the decryption for me. Connects to a newcs server. Cards can do multiple channels on the same transponder at the same time. Have not tried with HDTV streams since I don't have access to them but I cannot see why it would not spit out a dvb-s hd stream since it is just another data stream. Bandwidth is not a problem since it does multiple dvb-s sd streams at the same time. [edit2] I dealt directly with Hypermegasat via email. They issued me a paypal invoice as soon as we had worked out the shipping. Response via email was the best I have ever had with a online store. __________________ By reading this, you have already given me control over a tiny slice of your mind

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-01-08, 12:31 AM	#2 (permalink)
SPLog Premium Member iTrader: (1) Join Date: Jan 2008 Location: QLD Posts: 98 Spent time on board: 1 Week, 3 Days and 12:01:10	Two sites I know off (both Austech members) Sattronics - (madcow) SatTronics EuroDigital - (basque) Skystar 2 Special Edition EuroDigital

08-01-08, 05:49 AM	#3 (permalink)
tagg Senior Member iTrader: (8) Join Date: Jan 2008 Location: In a Tin Can Posts: 679 Spent time on board: 1 Month, 1 Week, 3 Days and 21:55:04	yea check basque out he's a cool guy i got one those of him no problems works well. Tagg

08-01-08, 06:55 AM	#4 (permalink)
covert Premium Member iTrader: (9) Join Date: Jan 2008 Location: My Imagination Posts: 726	Thanks. I will give EuroDigital a shot. I would prefer to not deal with SatTronics unless I had no other options.

15-01-08, 05:33 PM	#5 (permalink)
novica Premium Member iTrader: (0) Join Date: Jan 2008 Posts: 93 Spent time on board: 3 Days and 22:45:41	yep.....Basque is good...i bought a ss2 just the other day of him

11-02-08, 09:34 AM	#6 (permalink)
jimbo123 Premium Member iTrader: (5) Join Date: Jan 2008 Location: Melbourne Posts: 365 Spent time on board: 1 Month, 0 Weeks, 4 Days and 5:07:36	Can the card referred to above be: - used as a CS client ? - integrated into a MythTV setup? I recall asking similar questions here 'before the crash', but never saved the advice. Anyone on here have a Myth setup with a DVB-S support ? I'd like to add a suitable DVB-S card to my current Myth setup to use with C1, rather than having a Dream sitting next to the Myth frontend. Thanks, Jim.....

11-02-08, 01:34 PM	#8 (permalink)
jimbo123 Premium Member iTrader: (5) Join Date: Jan 2008 Location: Melbourne Posts: 365 Spent time on board: 1 Month, 0 Weeks, 4 Days and 5:07:36	Ah ok,.... fair enough. I'd assume then that Myth would have to be built from source and patched appropriately to get softcam support. Any links would be appreciated,.. Thanks, Jim.....

11-02-08, 11:37 PM	#11 (permalink)
jimbo123 Premium Member iTrader: (5) Join Date: Jan 2008 Location: Melbourne Posts: 365 Spent time on board: 1 Month, 0 Weeks, 4 Days and 5:07:36	So is Sasc-NG what I am looking for ? To provide/build a virtual adaptor based on a working DVB-S adaptor ? I've read in one place where they patch Myth but read elsewhere and there was no mention of messing with Myth. And then select the virtual adaptor within Myth. Is there anyone here that has done this? And are happy with their setup? Is the DVB-S card referred to above OK for this task,.. or is an alternate one recommended? Thanks, Jim.....

06-03-08, 12:32 PM	#12 (permalink)
jeff188 Junior Member iTrader: (0) Join Date: Mar 2008 Posts: 1 Spent time on board: -	> Is the DVB-S card referred to above OK for this task,.. or is an alternate one recommended? The following Geniatech cards can be found quite cheaply from OS, work very well with recent kernels and allow loop thru for more than one card: TV Products Expert

04-07-08, 08:17 PM	#16 (permalink)
SPLog Premium Member iTrader: (1) Join Date: Jan 2008 Location: QLD Posts: 98 Spent time on board: 1 Week, 3 Days and 12:01:10	Sorry Phillip, I'm not of any help as I think eurodigital closed shop, and Sattronics don't carry them anymore. Not sure who carries them.

07-07-08, 09:17 PM	#17 (permalink)
Phillip James Premium Member iTrader: (0) Join Date: Jan 2008 Location: Sydney Posts: 302 Spent time on board: 1 Week, 3 Days and 5:02:41	Gentlemen, Thanks for your help so far..............still looking and thinking. Regards,

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links