conan_oz

Thanks Superior, that update worked well with my blue 901275.I had to try 4 laptops before one would work.

If when you insert the CI card into the PCMCIA slot on the laptop and it is detected as a "PCMCIA-MTD-002" then the sofware will not work on that laptop without a CAM adapter ( what ever that is )

Working well in my Humax and Dream 7020 now.

I also tried a blue 901633 which would not work, does anyone know if the 901633 can be updated?

Thanks

fandtm666

( P/N : 901633 ) NEC I-Chip Ver. 0.07B , softcell Ver. 2.06B , compiled 04/July/2001 , non-flashable possible only opening the cam removing and replacing the eeprom with one externally reprogrammed

conan_oz

Thanks fandtm666 I wont waste anymore time on that one then.

Do you or anyone know if the a Sky 1 P/N 1250/2002 (same as icecrypt black ) can be updated?

Thanks again.

fandtm666

CI CAM Info, Loaders & Upgrades

MrElectricity

Well blow me down I thought they were all embedded cam only like the dreams. Still learning every day.

__________________
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿

johna

so, as anybody got a whity working with a sky cam.

conan_oz

No not yet but please post if you or someone does.

johna

ok heres the post.
Works well with blue ice Joker cam v1.17 final.in the old strong 4800 ii.

dont know if it updates yet but starts up fast. I had ver 0.79 but very erratic and some would not open.
now v1.17 excellent.
finaly a use for the old joker.
moral of the story, dont throw away any old sat gear.
johna

conan_oz

Hey Johna where is the link?

I think I my have tried v1.17 in my travels but could not get it to load.

johna

Joker CAM v1.17 FINAL - Sat-Television.com - Satellite Encryption
i cant seem to change anything in the menue it just flashes on, then off, its default is ALL. Which is ok as it works and updates.

bassett

Bullshit you did. I,ve never been known to give discounts

conan_oz

Thanks

wazza811

hi i have strong 4658x top slot has whitey,i want to put goldy for aurora in cam ,what type cam should i get any help appreciated

LeroyPatrol

You could just pick up any Irdeto blue cam to do the job for Irdeto 1. I'd be enclined to get a cam that works with your whitey in the event you need to kick start it or your strong gives up etc til another firmware upg comes along.

Leroy

wazza811

thanks leroy for that but what cam would u recommend for whitey and where would u recommend i get it from ,i am in nsw

LeroyPatrol

Purple cams seem to be the go. I've been using a Purple SCM 2.21a which 'kick started' cards. I think I saw telsat in Melb selling them on ebay. I have since upgraded the firmware to 2.26b on mine and haven't put it through it's paces as such I'm now hoping it still is as good as it was.
I'd stay away from a 2.26d SMIT as they are having issues. Others will prob post experiences also.

Leroy

wazza811

thanks Leroy ,i will look into it

wazza811

I got purple cam ,have put it into slot with whitey and goldy but no pics just scrambled channel ,both cards work in top slot,cam initilizes when put into slot,can anyone help. wazza

wazza811

hi my cam problem solved I had card upside down ,wazza

LeroyPatrol

that will do it

Which cam did you get in the end?

Leroy