copy a protected gold card

**anywherescool10** · 13-01-08, 10:18 AM

Hi Guys,

Any ideas on how to copy or clone a protected gold card ??

I am using the Infinity USB card programmer..

Cheers

**badass** · 14-01-08, 09:26 AM

I have never seen a protected gold card, so what makes you think it is?

Have you programmed the hex on the new card, as that has to be done before you put the data on?

I have not used a usb programmer but they all work similar.

**Kavakid** · 14-01-08, 06:54 PM

GGedit will read a protected card via a phoenix.

KK

**fandtm666** · 14-01-08, 06:59 PM

1: get a blank gold card
2: program it with
a:GFGold v2.2.6 Dual No Updating Coco.hex
b:GFGold v226 eeprom.hex

3: get a coppy of ggedit
4: put the working gold card in
5: select read
6: select save
7: dont close it and now put in the one you just made
8: select read
9: select load and load the file you just saved
10: select write

**Jaz808** · 14-01-08, 07:55 PM

Gold cards can have protected Pic's and earlier codes used a loader to go through the pic to read the eeprom, so becareful you could stuff the code on the card, if you are lucky enough to pull the details from the eeprom, then you can reload the pic if its a common code like Ghost Gold, otherwise you have lost the lot

**nathj** · 14-01-08, 09:04 PM

anyone have a copy of GGedit haveing trouble finding it?

**fandtm666** · 14-01-08, 09:27 PM

This is Fu*#ing painfull

**nathj** · 14-01-08, 10:18 PM

thanks fan its great to see there are so many members out there willing to help cheers

**anywherescool10** · 15-01-08, 02:36 AM

Thanks everyone for the replies..

I'll try to answer all your questions.

With the infinity usb software, when trying to clone the card, i get an error message that states: card is code protected and cant be cloned, so thats why i asked about a protected card.

I have had a look at various software and most of them dont have the option for a USB. ggedit doesn'y have the USB option as far as im aware. Maybe i will have to buy a serial cable to connect.

I have read that when reading the eeprom, it will delete it. Now i dont want to do this as i dont want to delete the card. My question is, when it reads it, does it save it to my pc so i can write it back on the card ?

thanks again for your help.

**mosc_007** · 15-01-08, 04:23 AM

first you need to dertmine the code that is used on the card
anything other than ghostgold you will have problems
try to get some comms to the card and read some details
then maybe someone can help you

**anywherescool10** · 15-01-08, 05:23 AM

cheers,
can anyone help and point me into the rigt direction as to where i can get ghost gold ??

**fandtm666** · 15-01-08, 05:25 AM

its in that file i posted before

**zeke.damien** · 15-01-08, 05:31 AM

Quote:

Originally Posted by anywherescool10

cheers,
can anyone help and point me into the rigt direction as to where i can get ghost gold ??

hey their you dont need to buy a serial cable as the usb infinity unlimted can emulate one, i have that same programmer

in the software click tools then VCP or Virtual serial port and then just use the default settings

that will allow the used of GGEDIT and FMCARD

**anywherescool10** · 15-01-08, 06:02 AM

cheers, but i dont have the inifinity unlimited, i just have the infinity usb..

**anywherescool10** · 15-01-08, 06:55 AM

Thanks everyone that is helping......

i have found ggedit thanks to fandtm666. cheers mate..

Now when running the card through GGedit V2 i get a "data corrupted or interupted" error.. any thoughts ??

**Jaz808** · 15-01-08, 07:35 AM

Try a pc that isnt running xp with sp2, i think xp, xp with sp1 works or try Microsoft Virtual Machine and load Win 98, again read my post just little up

**badass** · 15-01-08, 08:48 AM

as I said never seen a protected card and don't think there is if you have a problem pm me and I'll send a card

**anywherescool10** · 15-01-08, 09:17 AM

Hi everyone....

it seems i may be wrong as it may not be a gold card after all..

The card is white in colour with a gold chip..... sorry for the confusion, thanks badass for the tip !!

**anywherescool10** · 15-01-08, 09:19 AM

Quote:

Originally Posted by anywherescool10

Hi everyone....

it seems i may be wrong as it may not be a gold card after all..

The card is white in colour with a gold chip..... sorry for the confusion, thanks badass for the tip !!

and thanks to JAZ808

**Jaz808** · 15-01-08, 09:24 AM

Badass there is definatley protected cards, its done with the fuse option

White card then 99.9% Gamma card, no one has made it public if it can be copied, as far as we know it cant be done only by the sellers who sold the card and most sellers are known as re-sellers they dont make the card just sell it

13-01-08, 10:18 AM	#1 (permalink)
anywherescool10 Junior Member iTrader: (0) Join Date: Jan 2008 Posts: 8 Spent time on board: -	copy a protected gold card Hi Guys, Any ideas on how to copy or clone a protected gold card ?? I am using the Infinity USB card programmer.. Cheers

14-01-08, 09:26 AM	#2 (permalink)
badass Member iTrader: (0) Join Date: Jan 2008 Location: Adelaide Posts: 36 Spent time on board: 1 Day and 12:11:53	I have never seen a protected gold card, so what makes you think it is? Have you programmed the hex on the new card, as that has to be done before you put the data on? I have not used a usb programmer but they all work similar. __________________ One post with useful information is worth any amount of post with none.

14-01-08, 10:18 PM	#8 (permalink)
nathj Senior Member iTrader: (0) Join Date: Jan 2008 Location: somewhere over the rainbow Posts: 119 Spent time on board: 2 Days and 15:33:02	thank you thanks fan its great to see there are so many members out there willing to help cheers

15-01-08, 08:48 AM	#17 (permalink)
badass Member iTrader: (0) Join Date: Jan 2008 Location: Adelaide Posts: 36 Spent time on board: 1 Day and 12:11:53	as I said never seen a protected card and don't think there is if you have a problem pm me and I'll send a card __________________ One post with useful information is worth any amount of post with none.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

14-01-08, 06:54 PM	#3 (permalink)
Kavakid Premium Member iTrader: (0) Join Date: Jan 2008 Posts: 194 Spent time on board: 1 Week, 3 Days and 14:30:14	GGedit will read a protected card via a phoenix. KK

14-01-08, 06:59 PM	#4 (permalink)
fandtm666 Premium Member iTrader: (21) Join Date: Jan 2008 Posts: 1,474	1: get a blank gold card 2: program it with a:GFGold v2.2.6 Dual No Updating Coco.hex b:GFGold v226 eeprom.hex 3: get a coppy of ggedit 4: put the working gold card in 5: select read 6: select save 7: dont close it and now put in the one you just made 8: select read 9: select load and load the file you just saved 10: select write

14-01-08, 07:55 PM	#5 (permalink)
Jaz808 Senior Member iTrader: (0) Join Date: Jan 2008 Location: Hell Posts: 295 Spent time on board: 4 Days and 23:50:37	Gold cards can have protected Pic's and earlier codes used a loader to go through the pic to read the eeprom, so becareful you could stuff the code on the card, if you are lucky enough to pull the details from the eeprom, then you can reload the pic if its a common code like Ghost Gold, otherwise you have lost the lot

14-01-08, 09:04 PM	#6 (permalink)
nathj Senior Member iTrader: (0) Join Date: Jan 2008 Location: somewhere over the rainbow Posts: 119 Spent time on board: 2 Days and 15:33:02	anyone have a copy of GGedit haveing trouble finding it?

14-01-08, 09:27 PM	#7 (permalink)
fandtm666 Premium Member iTrader: (21) Join Date: Jan 2008 Posts: 1,474	This is Fu*#ing painfull

15-01-08, 02:36 AM	#9 (permalink)
anywherescool10 Junior Member iTrader: (0) Join Date: Jan 2008 Posts: 8 Spent time on board: -	Thanks everyone for the replies.. I'll try to answer all your questions. With the infinity usb software, when trying to clone the card, i get an error message that states: card is code protected and cant be cloned, so thats why i asked about a protected card. I have had a look at various software and most of them dont have the option for a USB. ggedit doesn'y have the USB option as far as im aware. Maybe i will have to buy a serial cable to connect. I have read that when reading the eeprom, it will delete it. Now i dont want to do this as i dont want to delete the card. My question is, when it reads it, does it save it to my pc so i can write it back on the card ? thanks again for your help.

15-01-08, 04:23 AM	#10 (permalink)
mosc_007 Junior Member iTrader: (0) Join Date: Jan 2008 Posts: 10 Spent time on board: 3:13:19	first you need to dertmine the code that is used on the card anything other than ghostgold you will have problems try to get some comms to the card and read some details then maybe someone can help you

15-01-08, 05:23 AM	#11 (permalink)
anywherescool10 Junior Member iTrader: (0) Join Date: Jan 2008 Posts: 8 Spent time on board: -	cheers, can anyone help and point me into the rigt direction as to where i can get ghost gold ??

15-01-08, 05:25 AM	#12 (permalink)
fandtm666 Premium Member iTrader: (21) Join Date: Jan 2008 Posts: 1,474	its in that file i posted before

15-01-08, 06:02 AM	#14 (permalink)
anywherescool10 Junior Member iTrader: (0) Join Date: Jan 2008 Posts: 8 Spent time on board: -	cheers, but i dont have the inifinity unlimited, i just have the infinity usb..

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links

15-01-08, 06:55 AM	#15 (permalink)
anywherescool10 Junior Member iTrader: (0) Join Date: Jan 2008 Posts: 8 Spent time on board: -	Thanks everyone that is helping...... i have found ggedit thanks to fandtm666. cheers mate.. Now when running the card through GGedit V2 i get a "data corrupted or interupted" error.. any thoughts ??

15-01-08, 07:35 AM	#16 (permalink)
Jaz808 Senior Member iTrader: (0) Join Date: Jan 2008 Location: Hell Posts: 295 Spent time on board: 4 Days and 23:50:37	Try a pc that isnt running xp with sp2, i think xp, xp with sp1 works or try Microsoft Virtual Machine and load Win 98, again read my post just little up

15-01-08, 09:17 AM	#18 (permalink)
anywherescool10 Junior Member iTrader: (0) Join Date: Jan 2008 Posts: 8 Spent time on board: -	Hi everyone.... it seems i may be wrong as it may not be a gold card after all.. The card is white in colour with a gold chip..... sorry for the confusion, thanks badass for the tip !!

15-01-08, 09:24 AM	#20 (permalink)
Jaz808 Senior Member iTrader: (0) Join Date: Jan 2008 Location: Hell Posts: 295 Spent time on board: 4 Days and 23:50:37	Badass there is definatley protected cards, its done with the fuse option White card then 99.9% Gamma card, no one has made it public if it can be copied, as far as we know it cant be done only by the sellers who sold the card and most sellers are known as re-sellers they dont make the card just sell it