Dsc 1565

**redozqld** · 07-10-08, 06:17 AM

I Pray to the Great DSC God that someone will grant me my Boon, and empart the knowledge of these panels on me...

Gents!

I've got a client that has a 1565, with a trouble light on, I've been to site, *2'd the bugger, and there is nothing there, honestly no lights light up. If I turn the power off and reset it, I reset the time and date, and the trouble light doesnt go away. The keypad has a zone plugged into it when I look at the back of the keypad, but at the panel end, its not plugged into anything...

The funny thing is that 5 stays up for a while after a reset and then goes away, just leaving the trouble light on.... No programming has changed, the customer knocked the keypad off the wall and got us out to fix it back up (No wires where loose that I could see, the only thing I can think of is perhaps it monitors the Bus and there is an intimitant fault with the connection?)

Battery 13.78 AC 17.6 Minimal Current Draw Resistor accross the Bell output, Sirens Draw less than 200mA when triggered...

Anyone have any thoughts, I'm at a loss and I cant get a straight answer out of the new retailers...

Thanks!!

ReD

**intelliGEORGE** · 07-10-08, 07:15 AM

Try reprogramming the time and date. I had a weird one like that, turned out to be T&D.

**keef82** · 07-10-08, 04:56 PM

Default and re programme using the PGM1 - Zone1.
They are dodge, had one do that exact same thing last week.

Fixed it.

**keef82** · 07-10-08, 05:10 PM

Is there any wireless modules on the system?
If so, and they are working ok, in the back of the manual, there is a 900 command u can enter to re initialize and reset the modules.

**keef82** · 07-10-08, 05:10 PM

If monitored, check the PSTN line voltage, check that line fault monitoring is turned offf as well.

**redozqld** · 08-10-08, 06:22 AM

Howdy All...

No wireless modules on the unit, I might try a reprogram and see what happens, DSC's are strange beasts at times..

ReD

**bss904** · 08-10-08, 02:52 PM

have you rung the New Zealand tech support yet red

**Keystone** · 09-10-08, 10:44 PM

Just disable the trouble light function. LOL

**intelliGEORGE** · 09-10-08, 10:56 PM

Quote:

Originally Posted by Keystone

Just disable the trouble light function. LOL

Pair of side cutters to the LED. Problem solved.

**Keystone** · 10-10-08, 05:05 PM

Quote:

Originally Posted by intelliGEORGE

Pair of side cutters to the LED. Problem solved.

Yeah feel like that sometimes. Some panels you can deactivate the service light through programming.......not sure about the DSC.

I would try function [902] in prog mode to reset modules.

**keef82** · 10-10-08, 05:54 PM

Great idea, lets disable the service light.
I mean, its not on for any valid reason, just one of those annoying things i guess.

Is that why u like Rhino panels ?
No Fault light?

**ArjanH** · 24-10-08, 12:39 PM

The problem is probably that a zone or module was in tamper or trouble and it was programmed out while still in tamper or trouble. The panel hasn't seen a restore on that zone and even though it has been programmed out it needs one before it is happy.

Best thing to do is to default the panel and reprogram it. 2 minutes work if you know what you are doing. You could try doing an upload if option 1 doesnt tickle your funny bone. The history will tell you what the issue was or is.

**Keystone** · 24-10-08, 05:48 PM

Quote:

Originally Posted by ArjanH

The problem is probably that a zone or module was in tamper or trouble and it was programmed out while still in tamper or trouble. The panel hasn't seen a restore on that zone and even though it has been programmed out it needs one before it is happy.

In that case a simple power down or enter/ exit program mode should fix that one would think.

07-10-08, 06:17 AM	#1 (permalink)
redozqld Member iTrader: (0) Join Date: Aug 2008 Location: Here in Brisbane Posts: 39 Spent time on board: 11:28:55	Dsc 1565 I Pray to the Great DSC God that someone will grant me my Boon, and empart the knowledge of these panels on me... Gents! I've got a client that has a 1565, with a trouble light on, I've been to site, *2'd the bugger, and there is nothing there, honestly no lights light up. If I turn the power off and reset it, I reset the time and date, and the trouble light doesnt go away. The keypad has a zone plugged into it when I look at the back of the keypad, but at the panel end, its not plugged into anything... The funny thing is that 5 stays up for a while after a reset and then goes away, just leaving the trouble light on.... No programming has changed, the customer knocked the keypad off the wall and got us out to fix it back up (No wires where loose that I could see, the only thing I can think of is perhaps it monitors the Bus and there is an intimitant fault with the connection?) Battery 13.78 AC 17.6 Minimal Current Draw Resistor accross the Bell output, Sirens Draw less than 200mA when triggered... Anyone have any thoughts, I'm at a loss and I cant get a straight answer out of the new retailers... Thanks!! ReD

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/security-alarms/11933-dsc-1565-a.html
Posted By	For	Type	Date
Security Alarms [Archive] - Austech	This thread	Refback	21-10-08 12:53 PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-10-08, 07:15 AM	#2 (permalink)
intelliGEORGE Premium Member iTrader: (2) Join Date: Jan 2008 Location: Antarctica Posts: 1,196 Spent time on board: 2 Weeks, 4 Days and 21:52:27	Try reprogramming the time and date. I had a weird one like that, turned out to be T&D.

07-10-08, 04:56 PM	#3 (permalink)
keef82 Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 276 Spent time on board: 1 Day and 20:30:36	Default and re programme using the PGM1 - Zone1. They are dodge, had one do that exact same thing last week. Fixed it.

07-10-08, 05:10 PM	#4 (permalink)
keef82 Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 276 Spent time on board: 1 Day and 20:30:36	Is there any wireless modules on the system? If so, and they are working ok, in the back of the manual, there is a 900 command u can enter to re initialize and reset the modules.

07-10-08, 05:10 PM	#5 (permalink)
keef82 Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 276 Spent time on board: 1 Day and 20:30:36	If monitored, check the PSTN line voltage, check that line fault monitoring is turned offf as well.

08-10-08, 06:22 AM	#6 (permalink)
redozqld Member iTrader: (0) Join Date: Aug 2008 Location: Here in Brisbane Posts: 39 Spent time on board: 11:28:55	Howdy All... No wireless modules on the unit, I might try a reprogram and see what happens, DSC's are strange beasts at times.. ReD

08-10-08, 02:52 PM	#7 (permalink)
bss904 Premium Member iTrader: (1) Join Date: Jan 2008 Location: Australia Posts: 213 Spent time on board: 1 Week, 6 Days and 6:12:41	have you rung the New Zealand tech support yet red

09-10-08, 10:44 PM	#8 (permalink)
Keystone Member iTrader: (0) Join Date: Jul 2008 Location: QLD. Posts: 68 Spent time on board: 1 Day and 8:23:10	Just disable the trouble light function. LOL

10-10-08, 05:54 PM	#11 (permalink)
keef82 Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 276 Spent time on board: 1 Day and 20:30:36	Great idea, lets disable the service light. I mean, its not on for any valid reason, just one of those annoying things i guess. Is that why u like Rhino panels ? No Fault light?

24-10-08, 12:39 PM	#12 (permalink)
ArjanH Member iTrader: (0) Join Date: Aug 2008 Posts: 36 Spent time on board: 11:08:43	The problem is probably that a zone or module was in tamper or trouble and it was programmed out while still in tamper or trouble. The panel hasn't seen a restore on that zone and even though it has been programmed out it needs one before it is happy. Best thing to do is to default the panel and reprogram it. 2 minutes work if you know what you are doing. You could try doing an upload if option 1 doesnt tickle your funny bone. The history will tell you what the issue was or is.

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links