Sed 62 - Page 2

AusSecTec · 24-01-08, 09:45 PM

Quote:

Originally Posted by No Brainer

Just pointing out that your post would indicate that the sed62 is GPRS only when in fact the manufacturers website states otherwise. Thats all.

Errrm, its the same unit fella...
Sim card makes the difference as stated previously? Who are you by the way and why are you attacking me?

**redstorm** · 24-01-08, 10:14 PM

Quote:

Originally Posted by AusSecTec

Errrm, its the same unit fella...
Sim card makes the difference as stated previously? Who are you by the way and why are you attacking me?

I dont think he is trying to attack you, you just come across as a bit of a wanker.

**kiwitech** · 25-01-08, 01:45 PM

It's probably like the Permaconn pump 64 events into the buffer and the thing locks up. Powering up and down fixes the problem but you will lose the events in the buffer. Dont you guys test anything ??. By the way the same thing happens over the PSTN if the buffer gets full.

**lad2** · 01-03-08, 07:22 PM

I've seen something similar a few times with the SED62, it's always come good after I've done a macro reset. Hold Test button on power up.

**lad2** · 03-03-08, 09:04 PM

Some people eh? Ring sec eng and ask them. That's where i got my info.

**Chimp** · 04-03-08, 07:44 AM

**redstorm** · 04-03-08, 10:06 AM

Very professional

**keef82** · 04-03-08, 09:39 PM

wow, posting that can get u in big trouble !!

Kinda illegal.

Unless u had Shaun's Express permission.

Quote:

Originally Posted by Sydneytech

Really !!! Well thats also where I also got the info.

-----Original Message-----
From: Shaun Cronin [mailto:Shaunc@seceng.com.au]
Sent: Monday, 3 March 2008 8:33 AM
Subject: RE: What is this guy saying
Fu#ked if I know, this guy is full of sh#t . Holding down the test
button on power up performs a basic led and relay test , that all it
does nothing more
And I know he is full of shit as what the fcuk is a macro reset, may be
I should start getting the names of these guys and then my legal people
will start doing a xxxxx removed xxxxxxxx them, just to see how
serious we are
I cannot read the forum
It wont let me in
Who is this guy paid by

SEC ENG Systems
Sec Eng Systems
Ph 02 9524 9952
Fax 02-9526-8301

**lad2** · 05-03-08, 09:53 AM

Ok. First time I had to do this, the problem was that a PSTN fail was being generated with every test report, yet a ?H showed nothing out of the ordinary. Whoever I spoke to at sec-eng advised me to hold test on power up. He referred to this as a macro reset. Fixed the problem.

Keep it professional.

**Paulypudding** · 03-05-08, 05:24 PM

As far as im aware they don't make the Sed 61 anymore. It's been superseded by the Sed 62 which does the same as the Sed 62 but with the gprs option as well. We've used quite a few of both types, as well as Fe 2 and 3000. To date we have had all models lock up at some stage. Could be the sim card (just like my mobile phone locks up every now and again) or could be a genuine modem fault with the unit which the manufacturers have failed to address.

I do agree that the original post was a reasonable question. Please answer if you can and dont if you cant. Doesnt get much simpler than that.

Paul

01-03-08, 07:22 PM	#24 (permalink)
lad2 Junior Member iTrader: (0) Join Date: Mar 2008 Posts: 5 Spent time on board: -	Re: SED62 I've seen something similar a few times with the SED62, it's always come good after I've done a macro reset. Hold Test button on power up.

04-03-08, 07:44 AM	#28 (permalink)
Chimp Senior Member iTrader: (2) Join Date: Jan 2008 Posts: 271 Spent time on board: 1 Week, 1 Day and 17:19:15	lmao

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/security-alarms/958-sed-62-a.html
Posted By	For	Type	Date
Security Alarms [Archive] - Austech	This thread	Refback	13-09-08 03:51 PM
Security Alarms - Austech	This thread	Refback	22-01-08 11:10 AM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

25-01-08, 01:45 PM	#23 (permalink)
kiwitech Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 111 Spent time on board: 23:03:47	It's probably like the Permaconn pump 64 events into the buffer and the thing locks up. Powering up and down fixes the problem but you will lose the events in the buffer. Dont you guys test anything ??. By the way the same thing happens over the PSTN if the buffer gets full.

03-03-08, 09:04 PM	#26 (permalink)
lad2 Junior Member iTrader: (0) Join Date: Mar 2008 Posts: 5 Spent time on board: -	Some people eh? Ring sec eng and ask them. That's where i got my info.

04-03-08, 10:06 AM	#29 (permalink)
redstorm Member iTrader: (0) Join Date: Jan 2008 Posts: 81 Spent time on board: 1 Day and 3:30:04	Very professional

05-03-08, 09:53 AM	#32 (permalink)
lad2 Junior Member iTrader: (0) Join Date: Mar 2008 Posts: 5 Spent time on board: -	Ok. First time I had to do this, the problem was that a PSTN fail was being generated with every test report, yet a ?H showed nothing out of the ordinary. Whoever I spoke to at sec-eng advised me to hold test on power up. He referred to this as a macro reset. Fixed the problem. Keep it professional.

03-05-08, 05:24 PM	#33 (permalink)
Paulypudding Junior Member iTrader: (0) Join Date: May 2008 Posts: 23 Spent time on board: 4:25:03	As far as im aware they don't make the Sed 61 anymore. It's been superseded by the Sed 62 which does the same as the Sed 62 but with the gprs option as well. We've used quite a few of both types, as well as Fe 2 and 3000. To date we have had all models lock up at some stage. Could be the sim card (just like my mobile phone locks up every now and again) or could be a genuine modem fault with the unit which the manufacturers have failed to address. I do agree that the original post was a reasonable question. Please answer if you can and dont if you cant. Doesnt get much simpler than that. Paul

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links