Intelsat 19 Help!

[Klim]

Hi everyone, I've bought a new receiver after my old one shat the bed. Can anyone tell me the specs to tune into IS 19? I have not touched anything dishwise and my old setup was left on my old box which would not turn on. Thanks.

I need the following:
LNB Freq
Transponder
DisEq 1
DisEq 1.1
22K
Motor Type.

[mtv]

What were you watching previously on IS19?

Apart from the dish, what else is in your setup... C-Band, Ku-Band, motorised or fixed dish, etc, etc

[Klim]

A couple of FTA channels, not much on these days.

Ku-band 166.0 E
Fixed dish

Like I mentioned the dish has not been tampered with.

[mtv]

Can't tell you which transponder if you can't say which channels.

Easiest way is to just do a blind scan.

What LO is your LNB?... you'll need to enter that first.

Select IS 19

Have a look at and select a Ku transponder.

You don't need DiSEqC, 22k switching or motor.

Once you have all that entered, perform a blind scan.... which will find all active transponders.

[Klim]

Looking for the TV Plus channels. More specifically MIS TV and RTS.

Tried a blind scan with nothing showing up.

LNB is 10700

[mtv]

What decoder are you using and what are the settings you entered before do the blindscan?