Results 1 to 8 of 8

Thread: Fiber Optic cable

  1. #1
    Member
    Join Date
    Apr 2015
    Posts
    251
    Thanks
    138
    Thanked 87 Times in 39 Posts
    Rep Power
    68
    Reputation
    1750

    Default Fiber Optic cable

    hello any one,
    i got some problem.... how too check the connection for a good FO cable...
    and how do its work, i see, its use rx and tx conections....

    thank you in advance....

    ANDREW



Look Here ->
  • #2
    Super Moderator
    mtv's Avatar
    Join Date
    Apr 2008
    Posts
    14,551
    Thanks
    4,055
    Thanked 8,709 Times in 4,358 Posts
    Rep Power
    2752
    Reputation
    107893

    Default

    What exactly is the problem?

    Inspection microscope/probe.

    PON meter

    Optical TDR

    Light Source

    Etc, etc.

    I take it you are not trained/endorsed for fibre?

    Most fibre faults (after test/certification) are mostly dirty connectors, but there's no way you can check/test without the necessary equipment.

    You'll need an OF cleaner and scope to check.

    If it's a fault somewhere else, you'll need an OTDR to locate the fault.

  • #3
    Junior Member
    Join Date
    Nov 2016
    Posts
    62
    Thanks
    3
    Thanked 19 Times in 10 Posts
    Rep Power
    15
    Reputation
    390

    Default

    Check th connection in what way? Do you mean to check if it's well connected and in working condition? Or do you want to check and find out the about the speed of your connection? Try to be a little more specific here.
    Thank you.

  • #4
    Premium Member

    Join Date
    Jan 2008
    Location
    Central Tablelands of NSW
    Age
    74
    Posts
    12,166
    Thanks
    1,113
    Thanked 3,029 Times in 2,068 Posts
    Rep Power
    1347
    Reputation
    41446

    Default

    And dont look into the open end of the cable either to see the pretty pulses of light as that maybe the last thing you do see so I would suggest that unless you are versed in handling Optical Fibre as explained by MTV, get someone who is.
    I stand unequivicably behind everything I say , I just dont ever remember saying it !!

  • The Following User Says Thank You to gordon_s1942 For This Useful Post:

    lsemmens (01-01-17)

  • #5
    Member
    Join Date
    Apr 2015
    Posts
    251
    Thanks
    138
    Thanked 87 Times in 39 Posts
    Rep Power
    68
    Reputation
    1750

    Default

    Quote Originally Posted by Alaves View Post
    Check th connection in what way? Do you mean to check if it's well connected and in working condition? Or do you check if it's well connected and in working condition? Try to be a little more specific here.
    Thank you.
    first i will check if it's well connected and in working condition, than check if it's well connected and in working condition, i'm sorry i"m a newbie for this problem
    my CCTV connection still not perview on server, just see the letter " connecting ", after break becouse the power problem...

    i use this tools, for check the cable FO, is that true?
    what the meanning of the first picture is?

    thank you





    Last edited by motouser234; 01-01-17 at 06:56 PM.

  • #6
    Super Moderator
    mtv's Avatar
    Join Date
    Apr 2008
    Posts
    14,551
    Thanks
    4,055
    Thanked 8,709 Times in 4,358 Posts
    Rep Power
    2752
    Reputation
    107893

    Default

    How are you going to check when you don't have the necessary equipment and the knowledge how to use it?

    I don't want to sound rude, but if you have to ask, you need to do a training course and then get lots of practical experience.... and become licensed.

    Fibre Optic cabling, testing and certification required an Open Cabler Licence, plus Optic Fibre endorsement, testing and certification.

    Fibre may seem simple and in reality it is, once you know how to work with it, but it's a very complex, microscopic material.

    It's impossible to work with fibre using the naked eye.

    As I said before, the majority of faults developing with fibre installations happen with dirty connectors, typically patch bays.

    A quick clean solves most issues.

    Power outages don't affect fibres themselves, so your issue is likely more to do with transmission, reception and/or distribution hardware, or perhaps just a configuration problem.... even an issue with the server.

    Did someone else install this CCTV system for you?... If yes, you need to get them to fix it.

  • The Following User Says Thank You to mtv For This Useful Post:

    tristen (01-01-17)

  • #7
    Member
    Join Date
    Apr 2015
    Posts
    251
    Thanks
    138
    Thanked 87 Times in 39 Posts
    Rep Power
    68
    Reputation
    1750

    Default

    Quote Originally Posted by mtv View Post
    How are you going to check when you don't have the necessary equipment and the knowledge how to use it?

    I don't want to sound rude, but if you have to ask, you need to do a training course and then get lots of practical experience.... and become licensed.

    Fibre Optic cabling, testing and certification required an Open Cabler Licence, plus Optic Fibre endorsement, testing and certification.

    Fibre may seem simple and in reality it is, once you know how to work with it, but it's a very complex, microscopic material.

    It's impossible to work with fibre using the naked eye.

    As I said before, the majority of faults developing with fibre installations happen with dirty connectors, typically patch bays.

    A quick clean solves most issues.

    Power outages don't affect fibres themselves, so your issue is likely more to do with transmission, reception and/or distribution hardware, or perhaps just a configuration problem.... even an issue with the server.

    Did someone else install this CCTV system for you?... If yes, you need to get them to fix it.
    the engginering was gone.... i dont know where he is now...
    thank you very much for your suggestion....
    Last edited by motouser234; 01-01-17 at 08:19 PM.

  • #8
    LSemmens
    lsemmens's Avatar
    Join Date
    Dec 2011
    Location
    Rural South OZ
    Posts
    5,369
    Thanks
    3,950
    Thanked 2,747 Times in 1,371 Posts
    Rep Power
    1167
    Reputation
    46200

    Default

    As Gordon has said, Unless you know what you are doing, you are opening a can of worms. I would suggest paying someone who knows what they are doing. I played with OF back in the 80s and I know enough to leave it in the hands of those who know what they are doing.

    edit: And yes, I was trained/qualified to work with the stuff.
    Last edited by lsemmens; 01-01-17 at 08:37 PM.
    I'm out of my mind, but feel free to leave a message...

  • Members who have read this thread: 35

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •