iPhone 5S jumper location

**VEL_1** · 16-01-17, 05:37 AM

I purchased for iPhone 5S a Power On/Off Lock Mute & Volume Switch Button Flex Ribbon Cable and tried to install it myself.
Everything went OK except one small jumper that fell-off and now I cannot identify its location.
It must be located in the upper part of the chassis between back camera and vibrator.
This jumper is 0.8cm long, color is black and difficult to read a number 486 (I believe) on it.
One end is closed for a screw to fix, the other end is open for the screw to fix and both ends of this jumper are twisted at 90 degrees.

Do we have an expert for help?
Thanks in advance for your answer.

PS. I can send a picture of the jumper (bracket).

**Alaves** · 30-01-17, 01:37 AM

I am no expert but I think you should search in YouTube for a tutorial or something. There are plenty of videos, I think you might find the location that you are searching for. I wish you good luck.

**freakee1** · 30-01-17, 08:48 AM

I have a couple of screen repairs to do tonight and one is an iPhone 5s - will have a good look and get back to you

f

**VEL_1** · 30-01-17, 06:44 PM

Thank you so much, I can send you pictures of the small jumper but you need to tell me how.

**freakee1** · 30-01-17, 09:03 PM

Can you post a picky - I have one here that has no battery and will be easy to see what you are after

when you reply - there is an icon that says "insert image" click that and choose the file of the jumper

looks like a picture frame with a tree in it

not by any chance this?

and easier to click the blue "P" Add image to post

**VEL_1** · 31-01-17, 04:26 AM

Here they are:

**mtv** · 31-01-17, 10:32 AM

The two pics... Looks like a match to me.

**freakee1** · 31-01-17, 01:23 PM

f

**VEL_1** · 01-02-17, 04:10 AM

Thank you so much.
Please confirm the jumper goes between the screws "A" and "B" in my attached picture.
Also, which end goes the closed or the open side of the jumper.

**freakee1** · 01-02-17, 01:56 PM

the open end is on the motherboard and the closed end is on the frame of the phone

also - take the support of the camera flash out as it goes under that - I'll attach a couple of close ups

**VEL_1** · 02-02-17, 02:26 AM

Thank you a lot freakee1, I installed the jumper as you indicated, the Iphone works now except the home button, may be because the tiny Home flex does not seat properly.

Also, while installing the jumper, the following small metal plate fell-off its position near the camera.
Can you help me find this location?
Thank you so much.