Good luck with that the DM500S won't be of much use when they swap over to DVB S2 on all transponders
Hi Guys.. been a long time!
Please please I need some help... I was one of the first to post on how to get the NZ45001B card working back in 2011 or maybe earlier but have been out of it for a long time, however a friend of mine needs some assistance and has asked me to help... so here I am... Please be gentle, its been a while.
Setup DM500S - Pli - oscam - Jaycar Mk II.
Now as per my posts, way back when, my friend recently had his box replaced and ended up with this type of card. Now, inserting it into the Dreambox after Mr. Sky had left, the card heated up and burnt, as mine did prompting me to mod my reader some years ago.
I dug my old modded 3.3v Jaycar Mk II reader out of moth-balls for him and am trying to get it running in Oscam and am failing abominably!!
Does anyone have a known working config, Oscam.server that is WORKING with a Jaycar Mk II reader and a Sly Card?
/dev/ttyS0 ?? doesn't seem right for a DM500S serial address and have tried everything i know... which nowadays, isn't a lot!
Many thanks in Advance.
Cheers
Ady_m
upgrading to Premium soon LOL
Look Here -> |
Good luck with that the DM500S won't be of much use when they swap over to DVB S2 on all transponders
jonc (17-02-18)
Cmon guys, 77 views and nobody has correct settings for a jaycar reader to talk to oscam?
Help please?
Cheers
Ady_m
upgrading to Premium soon LOL
Device = /dev/tts/0
For dm500 serial reader
dont say linux if i wanted it id install it
dont say linux if i wanted it id install it
Thanks.. Can you please point me to the bit which shows the oscam.servers part of the file to get a jaycar reader working? You see, I know how to setup oscam and use it as a card server.. I posted in that very thread how to calculate the BoxID back in 2011... I just cant get my jaycar reader to talk to oscam.
upgrading to Premium soon LOL
The DM500 is perfectly fine to read the skycard, there is a series current limiting resistor in the voltage path to the card slot and this must be 10ohm minimum or your card will burn. The resistor also drops the voltage from 5v to around the required 3.3v when card is powered up and drawing current (ohms law). A friend of mine who imported boxes of Chinese DM500s had this problem back in 2011, I spent hours desoldering the SMD resistor in each DM500 and replacing with correct value.
device=/dev/sci0
internal reader dm500s with oscam emu
LeroyPatrol (21-03-17)
@gareth41 do you have Oscam settings for any sky card? i have recently got sky and would like to set this up, mate send me 5 files, but Im unsure where to put them and what if anything else i need to do
files are oscam.dvbapi, oscam.server, oscam.user, oscam.conf, oscam.conf.bak
thanks
Thanks so I really only need the 3 files oscam.conf, oscam.server, oscam.user into /var/tuxbox/config and thats it, but on World of satelitte forum they say it goes in /etc/tuxbox/config
which file goes into usr/bin, as i dont have one there currently
thanks
Last edited by Mavarick; 14-02-18 at 02:25 PM.
Al sorted now, thanks for all the input
Bookmarks