Any modern PoE switch is autosensing and will only supply power if it needs to.
So unless a switch detects a compliant device at the other end, no power is sent.
I have a new 8-port NVR running 6 cameras using POE.
I have older IP camera (that has a separate ethernet and power) so I'm wondering whether I will experience issues if I plug it into the NVR. I'm thinking it should be OK but thought I would ask the experts before connecting it up.
Look Here -> |
Any modern PoE switch is autosensing and will only supply power if it needs to.
So unless a switch detects a compliant device at the other end, no power is sent.
AussieM8 (19-02-17)
Bookmarks