Results 1 to 2 of 2

Thread: Concept 4000 Access

  1. #1
    Junior Member
    Join Date
    Jan 2017
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default Concept 4000 Access

    Hey guys
    Quick one, intelligent 4 door access module.
    I want to use the LED and buzzer on a HID reader
    Where do I terminate them? and how would I program the buzzer to activate for 1min after 3 badge arming?


    Sent from my iPhone using Tapatalk



Look Here ->
  • #2
    Junior Member
    Join Date
    May 2008
    Age
    40
    Posts
    55
    Thanks
    16
    Thanked 10 Times in 9 Posts
    Rep Power
    197
    Reputation
    135

    Default

    Been a while since I have installed a concept panel, however from memory

    For 3 badge arming In door programming set inside area to what you want to arm, in reader module programming program arm mode to entry area if three swipes. Make sure your user has access to the door and area.

    The reader LEDs and buzzer can be wired into the auxiliaries of the door controller. I01:X09 - I01:X16.

    Then use these as the Valid Auxiliaries.

    Program the Area Auxiliaries to activate (Exit) to activate the buzzer.

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •