Does anyone know the advance settings password for the Yealink T42S
I have 2 voip lines and they (IInet) gave me 2 phones.
I was hoping to change the settings manually so I have both accounts on one phone.
Thanks
Achim
Does anyone know the advance settings password for the Yealink T42S
I have 2 voip lines and they (IInet) gave me 2 phones.
I was hoping to change the settings manually so I have both accounts on one phone.
Thanks
Achim
Look Here -> |
The default should be username "admin" and password "admin". Problem is if somebody else supplied it, and it is being provisioned remotely? So did you purchase it outright or was it supplied?
I have T41Ps and admin/admin gets me in. Ask your Provider for the Password if this does not work.
When you get in, I would like to see your Dial Plan.
My T41P's need 02 in front of the number even thou the Provider has set NSW to home.
If I leave the 02 out it calls the Providers home state. They are not getting anywhere sorting it out.
Reschs,
You should be able to set the area code within the phone itself... Although again - if it is being remotely configured or is retrieving the config from your provider it may not last!
But try going to the Web Interface - Settings - Dial Plan - Area Code. From there "02" into the code field, and the min and max fields should be "8" should hopefully fix your issue
Reschs (23-10-17)
Sorry for the late reply.
I have only gone down and set this up.
I previously tried this without setting the max/min from default.
Initial tests look good.
Bookmarks