Results 1 to 4 of 4

Thread: Xentrex GT 2.8kw Inverter

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member skozzy's Avatar
    Join Date
    Jan 2008
    Location
    Brisbane
    Age
    55
    Posts
    525
    Thanks
    31
    Thanked 19 Times in 16 Posts
    Rep Power
    217
    Reputation
    114

    Default Xentrex GT 2.8kw Inverter

    Does anyone have schemtics for a Xentrex 2.8kw grid-tie inverter. A storm that passed over recently stopped mine from working. The display still shows its reading the AC and DC volts, but displays a message saying External Shutdown. I contacted Energex asking if I can have it replaced with a 3kw inverter since 2.8kw is no longer made, but they said if I go over 2.8kw I will lose my rebate, they said I can down size to the next one which is 2.5kw, that just sux balls since it was storm damage and not a choice to change.

    So, with my inverter if I turn the mains on (with the DC from the panels OFF) it will power up and display line voltage and other diag stuff, if I turn the mains OFF and DC to ON it will also power up and display the same. But when Both AC and DC are on it will display "External Shutdown".

    I was told this inverter is a transformer design where newer ones are transformerless.

    So, would rather fix it and keep my 52c rebate (down size to a new unit but different brand is still an option but a poor one).
    Other choice but expensive is convert to offgrid or Grid Feed with Battery storage.

    If I up size I will be placed on the lowest rebate and I dread to think of the size system needed to compensate for the lose of the high rebate.
    Last edited by skozzy; 26-09-17 at 04:44 PM.

  2. Look Here ->

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •