Results 1 to 4 of 4

Thread: Satellite Scanner Help in Australia

  1. #1
    Junior Member
    Join Date
    Nov 2017
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 1 Post
    Rep Power
    0
    Reputation
    50

    Default Satellite Scanner Help in Australia

    Hi

    Before starting, I have to say that I have the green flag from admin to post this request on the forum.

    My name if Philippe , living in France and owner of the website www. digitalbitrate.com . ()

    My web site is like lyngsat or other satellite channels listing website but I am doing more technical measurments like bitrate measurements, video resolution, audio type, EIT storage, things that other websites are NOT doing.

    I am actually well covering Europe and North Africa.

    The live measurements are done by scanners that are connected to Dish/LNB and to internet.

    To increase coverage of my website, I am looking from someone in Australia to handle this scanner, looking especially on Optus D2 and D3 but also other satellites that can be received.

    The scanner (small box 12x8x3cm) is free (I am providing all necessary things) and needs to be connected to LNB and to internet box by ethernet cable. nothing else to do than connect the scanner.

    If LNb change is needed (for more outputs) or other thing , I take all expenses on my side.

    Technically, scanner is consumming around 5 Watts, and is taking internet upload bandwith of around 100 kbits/seconds for 5 minutes each 10 minutes.

    I really think that these measurements can help Australian satellite community as it does for Europe.

    You can answer in the forum or private message or contact me by email philippe@digitalbitrate.com

    Many Thanks

    Philippe
    Last edited by philippe_dbr; 27-11-17 at 06:35 AM.



Look Here ->
  • #2
    Junior Member
    Join Date
    Nov 2017
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 1 Post
    Rep Power
    0
    Reputation
    50

    Default

    Hi

    Just an update following this post.
    I have some few contacts in Australia, but very good contacts.
    Thanks to the forum and all readers.

  • #3
    Junior Member
    Join Date
    Nov 2017
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 1 Post
    Rep Power
    0
    Reputation
    50

    Default

    I have also a contact in New-zealand, as some beams are only for NZ.
    I hope also to launch some scans there.

    Thanks

  • #4
    Junior Member
    Join Date
    Nov 2017
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 1 Post
    Rep Power
    0
    Reputation
    50

    Default

    Hi

    Bitrate scans started
    For now 2 Satellites
    OPTUS C1/D3 :
    OPTUS D2 :

    Also DTT (Perth) available


    Also DAB (Perth) available


    More to come ...

  • The Following 2 Users Say Thank You to philippe_dbr For This Useful Post:

    harryt (31-01-18),hazman (31-01-18)

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •