Hello garryk,
Have you read the NDS card posts here for Oz? Maybe of some help.
You do need to config the card slots.
Although i see you are just using a DM500, in which case you still need to do the same.
The below is for a DM7xxx, but should work with a DM500
This goes in your ccam.cfg
#N: ipaddress portnumber username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
#the following will read any card that is in any of the slots including the serial port with a phoenix
#epsilon card must go in lower slot at front
#gamma only works in phoenix at 6 mhz
#------------------------------------------------------------------------------------
#these 3 lines make the server a client to itself
N: 127.0.0.1 6666 user1 password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 7777 user1 password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 8888 user1 password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#------------------------------------------------------------------------------------
I hope i have this right, i haven't used Ccam in a long time now.... You may have to do your newcs.xml now.
I have never heard of anyone using a Dreambox for NZ Sky yet and was hoping to hear of someone that was.....
Good Luck mate
Bookmarks