Have you contacted DMM and let them know about it ?
Get them to fix the DM800 issues while they at it .
Hi guys,
When i plug in the serial phoenix to the rs232 port, and boot up the box it assumes that the box is going to be in flash mode from the pc...(both with the big switch in or out)...
I have taken out the pheonix and then rebootedenigma , however the reader does not function... Reader works fine in the dm500 with same config file etc..- Cccam that is...
Just wondering does any1 know anything about this ?
Thanks
Look Here -> |
Have you contacted DMM and let them know about it ?
Get them to fix the DM800 issues while they at it .
if i was to ask they they probably wouldnt care, since they only support "dreamcrypt".
I don't have one but try booting the box first before plugging in the reader then restart the cam and see what happens.
Leroy
power the reader form the usb port instead of an external power supply
on bootup it detects the connection and will hang in flash mode, plugged into usb, the receiver will boot then turn on the power to the usb ports once booting from flash
this is the only way ive managed to get one working on a 7020 that had the exact same problem, now reboots every time with no problems
600 PVR is the same....
no luck... doesnt seem to get any response from the serial port when trying cccam or newcs......
made the usb adaptor connect, lights work fine... tested the phoenix with the modded usb adaptor on the pc and it works fine on the pc (newcs)...
my config files are fine as it works fine in a dm500s...
any more ideas or work arounds ?
thanks guys..
have you tried connecting to the serial port using hyperterminal and serial cable ?
whats hyperterminal ??
i jus connect it normally...
why not use the CI module instead?
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
every dreambox since the 7025 has no "real" rs232.
u will have to use a usb phoenix.
As far as i know the internal readers of the dm800 read all cards.
yup the 8000
the slots read the cards fine ...
but still why waste a jaycar reader....
so since 7025 no serial port would work ? is this true ?
Bookmarks