you must have a GPO to power the ups so
1: turn the power of to you power point from the fuse box outside.
2: unscrew the gpo face plate
3: connect a new 6mm earth wire to where the houshold earth is
4: nick a small notch on edge of gpo so when screwed back allows earth wire to sit flush
5: crimp a terminating connector to the end of new wire
6: now make up a new length to reach from lnb connection to earth wire you just installed.
7: add appropriate crimps and connect
8: insulate exposed crimps.
9: switch power back on
Bookmarks