Results 1 to 9 of 9

Thread: Help Tait T2020-321

  1. #1
    Junior Member
    Join Date
    Mar 2009
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default Help Tait T2020-321

    Hi all just got a tait t2020-321 does anyone know the pin outs on the mic conector to db9 serial so i can make up a lead to program it.

    thanks



Look Here ->
  • #2
    Super Moderator
    mtv's Avatar
    Join Date
    Apr 2008
    Posts
    15,748
    Thanks
    4,469
    Thanked 9,669 Times in 4,802 Posts
    Rep Power
    3199
    Reputation
    127910

    Default

    Here ya go, not only the pin-outs, but the full programming cable diagram.


  • #3
    Junior Member
    Join Date
    Apr 2010
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default Tait 2015

    Does anyone know the pin outs on the mic conector to db9 serial so i can make up a lead to program it. I have a Tait 2015 radio

    Thanks

  • #4
    Super Moderator
    mtv's Avatar
    Join Date
    Apr 2008
    Posts
    15,748
    Thanks
    4,469
    Thanked 9,669 Times in 4,802 Posts
    Rep Power
    3199
    Reputation
    127910

    Default

    Quote Originally Posted by mossie View Post
    Does anyone know the pin outs on the mic conector to db9 serial so i can make up a lead to program it. I have a Tait 2015 radio

    Thanks
    All details shown in the file on the link I provided in the post, just prior to yours.

  • #5
    Junior Member
    Join Date
    May 2011
    Location
    Gold Coast Aus
    Posts
    16
    Thanks
    1
    Thanked 1 Time in 1 Post
    Rep Power
    0
    Reputation
    15

    Default

    Pin 1 - Spare Blue
    Pin 2 - Gnd Green
    Pin 3 - PTT Red
    Pin 4 - Mike Gold
    Pin 5 - Gnd Black
    Pin 6 - Gnd Yellow

    Hope this helps

  • #6
    Junior Member
    Join Date
    May 2010
    Posts
    132
    Thanks
    21
    Thanked 65 Times in 45 Posts
    Rep Power
    120
    Reputation
    1202

    Default

    Well Radio-Nige,

    If that pinout you supplied is supposd to be the T2000 Mic Socket, it doesn't help at all.
    Pin 1 - 13.5V
    Pin 2 - TX Data (out of radio)
    Pin 3 - Mic PTT
    Pin 4 - Mic Audio
    Pin 5 - Gnd
    Pin 6 - RX Data (in to radio)

  • #7
    Junior Member
    Join Date
    May 2011
    Location
    Gold Coast Aus
    Posts
    16
    Thanks
    1
    Thanked 1 Time in 1 Post
    Rep Power
    0
    Reputation
    15

    Default

    Sorry mate.

  • #8
    Junior Member
    Join Date
    Jan 2014
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    I realise post is quite old but I have been given a Tait T2020-321. As my old boat radio died it couldn't have come at a better time. If anybody can help me it would be much appreciated. The unit came with no handset or aerial.

    Can anybody recommend a handset that would fit and work on the Tait please and I believe only need to by a VHF aerial in the 156 to 162mHz fequency.

    It appears that the previous owner has limited the radio to 4 channels one being their emergency channel. Do I need software to unlock and enable all channels from CH1 to CH88.

    regards
    Nev

  • #9
    Junior Member
    Join Date
    Jan 2008
    Posts
    245
    Thanks
    83
    Thanked 77 Times in 54 Posts
    Rep Power
    153
    Reputation
    1240

    Default

    Channels are not unlocked rather programmed in. The programming software will allow you to add the necessary channels in. You can pick up Tait microphones on eBay, you need the type with the RJ12 connector on them.

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •