Hmmm, I got impression scam might work but tried 3.29a, 29-12-2007, 26-11-05 & 3.x all without avail
H: { SN SN SN { MK MK MK MK MK MK MK MK MK MK } }
M: { 00 ID ID { PK PK PK PK PK PK PK PK } }
Suggestions anyone?
Can someone please remind me whether any of the softcams emulate Irdeto 1 properly from HMK & HSN (rather than just from PMK)?
Or don't people bother? I know we can update PMKs by hand but surely one of the emus supports EMM updates from HMK alone?
I dug out an old DM500 for Aurora the other day but now that keys are rolling I can't remember how to configure it, apart from with an external phoenix and official card or wafer.
Look Here -> |
Hmmm, I got impression scam might work but tried 3.29a, 29-12-2007, 26-11-05 & 3.x all without avail
H: { SN SN SN { MK MK MK MK MK MK MK MK MK MK } }
M: { 00 ID ID { PK PK PK PK PK PK PK PK } }
Suggestions anyone?
soft (19-02-11)
From memory (long time since I used it) Newcamd used to update with the HMK included in the config file. The file was called something like puua.
i think it was ppau....
Last edited by hoe; 21-03-09 at 01:49 AM.
Have a read of this thread it should get you going.
Use Newcamd 6.10b and put ppau file in var/scce it will auto update for you.
Regards
Ricci
Gbox will keep them up to date
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
hey tnarg, i thought you were banned....
really now thats news to me
maybe you have me confused with someone else ?
Thanks guys, the advice regarding newcamd was spot on.
For those catching up on all this, with Irdeto 1 you have
- Hex Serial Number (HSN) and Hex Master Key (HMK)
- Provider ID (ProvID) and Plan Master Key (PMK)
- Plain Keys (session keys)
The secret held by smartcards is the HMK. The HSN is unique to the card.
Plain Keys are stored by cards and used during ECM processing to decrypt the control words needed to decode pictures.
Plain Keys are supplied to groups of cards based on Provider ID, and they're sent out in encrypted EMMs that require the PMK for unpacking.
PMKs are supplied to cards by the stream, sent out as EMMs addressed to individual HSNs. To minimise traffic they aren't sent as often as Plain Key EMMs. The value of the PMK doesn't necessarily change all the time, but at the moment they are changing.
At times like these, when the PMKs are changing, if you have the PMK but not the HMK you'll get pictures for a while but it'll stop working with the next PMK change. If you use an emulator which lets you specify the HSN and HMK it will get the other things automatically from the stream when the necessary EMMs arrive. Not all emulators let you specify the HMK but Newcamd 6.10d is one which does.
For those who are interested here's what I did, using PLi DM500 Jade. I assume you've already set up Antenna settings for your LNB and scanned Aurora network (12407 Vertical 30000 2/3).
1. under Setup | System Settings
enable network & DHCP, make note of IP address
2. under Setup | Software Management | Downloads | SoftCams
select and install Newcamd 6.10b
(no need to install Newcamd Config 6.10b)
3. Open a shell prompt (I use on XP or Terminal on Leopard)
connect to dreambox:
telnet 192.168.0.4 (or whatever the dreambox IP address is)
username: root
password: dreambox
4. cd /var/scce
5. vi ppua
Press 'I' for insert and type the following line:
0602:000000:00:00c3ssssss:mm mm mm mm mm mm mm mm
where
ssssss = Hex Serial Number (three bytes / 6 digits)
mm mm mm ... = Hex Master Key (ten bytes / 20 digits)
You can obtain values for HSN and HMK from a working gold/silver Aurora card, or from various files floating around, or from friendly Austech members.
6. Press esc to stop insertion
Then ':wq' to write change and quit.
7. under Setup | Softcam Setup
select Default SoftCam: newcamd-6.10b
choose Save and restart cam
8. tune to an Aurora channel (eg ABC TV SE).
You may need to wait up to 20 minutes for pictures initially since PMK update EMMs aren't very frequent.
Once you have pictures you'll find a bunch of other files get written to /var/scce directory by newcamd. In particular
/var/scce/ppua : gets updated with additional line containing ProvID Group and PMK
/var/scce/keylist : stores plain (session) keys
Newcamd also uses files in /var/keys directory such as SoftCam.Key and newcamd.conf, but you don't need to worry about them if you're just using it to emulate Irdeto 1 Aurora.
Thanks GW1. Another excellent tutorial.
Correction, the line above should be
0602:000000:00:00c3ssssss:mm mm mm mm mm mm mm mm mm mm
(The Hex Master Key, indicated by mm above, is 10 bytes long - not 8.)
Thanks for the info.
Another thing that I found that might help others is that the hex needs to be in lower case.
Someone may correct me however
I tried Newcamd 6.10b's ppua file with upper case and it definitely still works. What you do need to include is the spaces within the HMK - if you omit them it won't work.
Hexadecimal parsers are nearly always case insensitive, at least in my experience. It would be an unusual C programmer who parses hex without handling case properly. But I agree that capitalisation is worth checking when having problems.
Install newcamd 6.10b and create a file called ppua and put it into /var/scce.
Newcamd then creates some other files, one of which holds the plain keys.
If there is an EMK update it should handle that too (so no going back to a logger for new EMK).
Create the 'ppua' file (no extension) using notepad or similar and copy in the following:
0602:000000:00:0001XXXXXX:aa aa aa aa aa aa aa aa
0602:000000:00:00c3YYYYYY:bb bb bb bb bb bb bb bb bb bb
Just 2 lines is all.
XXXXXX is the provid
aa's are the PMK
YYYYYY is the HSN
bb's are the HMK
Should all be OK after that.
Thanks go to enf
aalyasseri (05-07-11),bloggs (02-06-09),OSIRUS (15-05-09)
Hell...months since I wrote that...I don't see how you can go wrong.
Remember though...gw1 says that you dont need the PMK line...this is true if they are rolling keys. When I wrote that they weren't, so that line had to go in to get pictures.
It will auto update perfectly after that. Just remember to put Aurora on when there is am EMK update and wait until it gets a hit...maybe a while depending on how fast the keys are rolling. The rest of the time when you switch to Aurora, you may have to wait a couple of minutes to get a plain key, so be patient.....
Cheers
enf
The fact that there's a highway to hell and a stairway to heaven says a lot about the anticipated traffic flow.
OSIRUS (15-05-09)
Thanks Guy's great info.
Bookmarks