Have you used the com port before? EG RS232 upload.
Disconnect ethernet cable and start box. I've found sometimes when it locks up, it starts searching the network, cause it's there! So by disconnecting, then the box will not look at that part.
If you cant connect via com port, then I'm thinking you've got real drama's. If it was working ok prior to upload and you've more than likely done something wrong in your 'flashing' then I think the RS232 is your only hope. I have had drama's with that. I ended up using a different PC and it worked straight away. So dont get carried away that it may not connect, erase, flash.
It's critical to know if you've connected with the PC your using, to the dream via RS232.
Bookmarks