Hi guys, I know this will be a very old topic, but I still want to make sure this can be work.
1. Can dm500 internal card reader read genuine Foxtel card?
2. If I put a dream box down stairs as a server, can I watch Fox channels on upstair by using another dm500 as a client. Can CCcam share Fox services? As I know, SelecTV cannot.
Thanks!
Look Here -> |
Reality is an invention of my imagination.
ಠ_ಠ
But in short yes, run the bluey down stairs. Simply add a F line eg
F: user password
On the client upstairs simply run a C line eg
C: 192.168.0.20 12000 user password (where 192.168.0.20 is the downstairs server IP, 12000 is the default port).
Nothing else is required in the Cccam.cfg other than the C line on the client.
Last edited by CoopsOz; 19-04-09 at 02:18 PM.
OK, I'm having a similar problem.
Trying to share externally. I'm the server (and that's where the problem is)
Using Newsc and Cccam.
Sharing on a LAN no probs
Cccam.cfg has the following added line
N: 192.MYIP.0.0 12000 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
C: username password
What and how do I config my Newsc.xml
Tried a few things with no luck.
The client works fine. Tested to another IP and got pics. Cant get through my router. I have port FWD my router to the port I am using. I have also created a DNS and tried that. Something pretty simple here............and it's me!
Cheers, Saintaholic
Can you get to your router via your DNS?
you should server the card with one or the other Choose Newcs or CCcam then work from there.
you can serve from newcs to CCcam and then cccam can on share but its easier just to add in the user/pass for each box in the newcs.xml file, Then you client can use any version of emu they want eg mgcamd or evocamd etc.
Davo
Trying that now Davo. Bit hard when the mates not answering and my misses is a misses
Cheers, Saintaholic
ok my server is newsc only. No CCcam installed now. My other 2 boxes within my house are both sharing fine. One has CCcam (Dream) and the other is Newcamd (Octagon)
Now my mate has a Dream with CCcam. He has tested his unit to another server and got pics straight away.
Now to config my end.
I have port fwd all ports that are mentioned in the script. (Newsc.xml)
<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>Sci</type>
<node>/dev/sci0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
<device>
<name>upper</name>
<type>Sci</type>
<node>/dev/sci1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>/dev/tts/0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey></boxkey>
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey></irdeto-camkey>
<irdeto-camkey-data></irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>ROUTER IP</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name></name>
<password></password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<user>
<name>user3</name>
<password>user3</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>
<user>
<name>user2</name>
<password>user2</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>
<user>
<name>user1</name>
<password>user1</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>
<user>
<name>mates username</name>
<password>mates password</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>
</newcamdserver>
</newCSconfig>
So my N: my is ??? tried everything
Cheers, Saintaholic
His cfg
SERIAL READER : /dev/tts/0 phoenix
B: /dev/tts/0 04
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/tts/0
N: 127.0.0.1 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00 (8 Bytes)
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (64 Bytes)
TRY ALL CHIDS : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
C: MY IP ADD - PORT (tried 10000, 12000 34000 etc) username password
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
Tried a few diff N Lines. This is what currently works in my dream as a client
Cheers, Saintaholic
Nah......running network magic and have 9 devices all with diff ip's
Cheers, Saintaholic
Use cccam as client.Newcs as server.
Make sure his router has firewall disabled.
your N line
N: 127.0.0.1 34000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
he doesnt need N line in cccam.cfg.
His C line
c: MY IP ADD - PORT 12000 username password
your F line F:username password 2 0 0 in cccam.cfg
not exactly sure what you mean here
your F line F:username password 2 0 0 in cccam.cfg
are you referring to version 2.0 of CCcam
Cheers, Saintaholic
actually, at the moment, I dont have CCcam on my server. I have the config file still there. Is that enough?
Cheers, Saintaholic
Will give mate access to the Phoenix card
N: yourIP 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Will give him access to the slot1 (sci0) card
N: yourIP 34000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Will give him access to the slot2 (sci1)card
N: yourIP 34001 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
so his cfg only needs to have...
N: yourIP 34000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: yourIP 34001 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: yourIP 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
NOTHING ELSE need be in the file unless he has a card serving.
Davo
I gather a C: line with his username and password
Cheers, Saintaholic
Mate,
N: lines are newcamd server connection eg, Newcs.
F: & C: Lines are both for CCcam serving & re-sharing. You really dont want people to be spidering/re-sharing off your card.
Davo
So basically my newsc script is ok and apart from a cline in his cfg thats now ok. Why then wont it work.
My router is port fwd all those values
Cheers, Saintaholic
Disregard
Your newcs xml can be a bit tidyer but how it works..
This is really all you need each Mate you allow to share you edit your xml file and add another entry as below..
<user>
<name>user1</name>
<password>user1</password>
<au>on</au>
</user>
Then you restart Newcs to let changes take affect.
(each line gives access to each card if you have 2 cards)
The you give you mate these N:lines
Your friend would add them into what ever format he needs for the EMU he is using.
N: yourIP 34000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: yourIP 10000 user1 user1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Bookmarks