open the ip address of your PC on port 8080 and see if VLC is indeed running i.e. and if you see a VLC web interface it is working as it should. If not you might have something else running on port 8080
All this is also mentioned on the wiki on
Does Movieplayer work with this combination?
The reason I ask is I get a "streaming error" on the dreambox whenever I try to play any file. VLC is setup as per the PLi wiki instructions, and the PC shares can all be seen.
My concern is that the ports used have changed somewhere when updating either PLi or VLC. From Webif, the dreambox is set to use port 9090 for streaming by default. But where is this port set in VLC?
Look Here -> |
open the ip address of your PC on port 8080 and see if VLC is indeed running i.e. and if you see a VLC web interface it is working as it should. If not you might have something else running on port 8080
All this is also mentioned on the wiki on
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
OK. Thanks. Was getting a "403 Forbidden (/)" when doing that. Updated to VLC v0.9.9 and it now streams, so not sure what was the problem. Suspect that I may have had an extra space in the " --intf wxwin --extraintf=http" line.
Last edited by OzBlackKnight; 25-04-09 at 02:09 PM. Reason: Update
Bookmarks