Perhaps try a rescan of all channels and see if that fixes things?
Hi, I have had a HDTV for a while but normally just watch Foxtel.
I want to watch the Tour de France on SBS2 in Melbourne but when I select it on my TV it goes for about 5 seconds and then the screen goes blank.
I have gone through all the menus on the TV setup but cannot work out why its doing this on this channel.
I have a normal TV antenna mounted on the outside of the house.
The TV is a LG "XD HDTV"
There is about 75% signal strength if that is helpful.
Cheers and thanks for any replies
Look Here -> |
Perhaps try a rescan of all channels and see if that fixes things?
Do a factory default reset first (deletes everything) then re-scan.
If you receive SBS 1, then you should also receive the other SBS channels, including HD.
If you can't receive SBS at all, perhaps you have an antenna/reception issue with SBS UHF signals, as all other channels in Melbourne are VHF (from the main Mt Dandenong transmitters)
Cheers, will give it a try tonight.
Bookmarks