Results 1 to 2 of 2

Thread: Bosch Solution 144 - Not able to read GSM SMS messages received

  1. #1
    Junior Member
    Join Date
    Mar 2013
    Posts
    7
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default Bosch Solution 144 - Not able to read GSM SMS messages received

    Hi,

    I've just installed a CM743B GSM Radio Module on a Solution 144 panel. I've configured it how I think it should be configured, but must be missing something.

    The panel will accept and process commands via SMS however any SMS messages it sends cannot be read on the receiving device. This includes any reports or response to commands sent i.e. <code>,system,status

    On an android device, in place of the received SMS a "<<Content not supported>>" message is reported. On a non-smart phone, the SMS just appears blank or empty.

    On the panel I have set the country (5-2-3) to New Zealand and TX Format Destination 1 (5-4-0) to GSM SMS (12).

    Is there something else I should be setting?

    Any help much appreciated.

    Cheers,



Look Here ->
  • #2
    Junior Member
    Join Date
    Mar 2013
    Posts
    7
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Just in case someone else in NZ comes across this, the problem is only apparent when using the 2 degrees network. If you use the Vodafone network everything appears to operate as expected.

    The problem has been reported back to Digiflex by the local distributor and they are working to identify and resolve the issue.

    Cheers,

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •