-
Junior Member
- Rep Power
- 0
- Reputation
- 10
Bosch Solution 144 - Not able to read GSM SMS messages received
Hi,
I've just installed a CM743B GSM Radio Module on a Solution 144 panel. I've configured it how I think it should be configured, but must be missing something.
The panel will accept and process commands via SMS however any SMS messages it sends cannot be read on the receiving device. This includes any reports or response to commands sent i.e. <code>,system,status
On an android device, in place of the received SMS a "<<Content not supported>>" message is reported. On a non-smart phone, the SMS just appears blank or empty.
On the panel I have set the country (5-2-3) to New Zealand and TX Format Destination 1 (5-4-0) to GSM SMS (12).
Is there something else I should be setting?
Any help much appreciated.
Cheers,
-
Junior Member
- Rep Power
- 0
- Reputation
- 10
Just in case someone else in NZ comes across this, the problem is only apparent when using the 2 degrees network. If you use the Vodafone network everything appears to operate as expected.
The problem has been reported back to Digiflex by the local distributor and they are working to identify and resolve the issue.
Cheers,
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks