THESE CAMS ARE A COMBINATION OF MY OWN SUBSCRIPTIONS TO TOMTOM AND THOSE COMPILED BY THE MAVERICK, ALL CREDIT FOR THESE CAMS GO TO THE MAVERICK FOR THE TIRELESS WORK HE DOES WITHIN THE TOMTOM COMMUNITY AND FOR THE HARD WORK HE PUTS INTO COMPILING AND UPDATING THE META.TXT FILES
please note
ALWAYS make a backup of your tomtom before you tinker with it. either by using tomtom home or just by copying the entire contents of your memory card or device to your pc.
==================
18.08.09 old versions
Safety_Cam_NZ_TomTom 1348
Safety_Cam_AT_TomTom 3324
Safety_Cam_BE_TomTom 3325
Safety_Cam_DE_TomTom 3326
Safety_Cam_ES_TomTom 3327
Safety_Cam_FI_TomTom 3328
Safety_Cam_FR_TomTom 3329
Safety_Cam_UK_TomTom 3330
Safety_Cam_IT_TomTom 3331
Safety_Cam_NL_TomTom 3332
Safety_Cam_NO_TomTom 3333
Safety_Cam_PT_TomTom 3334
Safety_Cam_SE_TomTom 3335
Safety_Cam_PL_TomTom 3336
Safety_Cam_CZ_TomTom 3337
Safety_Cam_ZA_TomTom 2849
Safety_Cam_AU_TomTom 3339
Safety_Cam_BR_TomTom 3340
Safety_Cam_US_Canada_TomTom 3341
Safety_Cam_NL_Premium 3321
Safety_Cam_FR_Premium 3322
Safety_Cam_DE_Premium 3323
Safety_Cam_UK_Premium 3317
25.08.09 new versions
Safety_Cam_NZ_TomTom 1348
Safety_Cam_AT_TomTom 3368
Safety_Cam_BE_TomTom 3369
Safety_Cam_DE_TomTom 3370
Safety_Cam_ES_TomTom 3371
Safety_Cam_FI_TomTom 3372
Safety_Cam_FR_TomTom 3373
Safety_Cam_UK_TomTom 3374
Safety_Cam_IT_TomTom 3375
Safety_Cam_NL_TomTom 3376
Safety_Cam_NO_TomTom 3377
Safety_Cam_PT_TomTom 3378
Safety_Cam_SE_TomTom 3379
Safety_Cam_PL_TomTom 3380
Safety_Cam_CZ_TomTom 3381
Safety_Cam_ZA_TomTom 2871
Safety_Cam_AU_TomTom 3383
Safety_Cam_BR_TomTom 3384
Safety_Cam_US_Canada_TomTom 3385
Safety_Cam_NL_Premium 3386
Safety_Cam_FR_Premium 3387
Safety_Cam_DE_Premium 3388
Safety_Cam_UK_Premium 3389
=========================
Code:
http://www.amigura.co.uk/s4.php?d=0/54927J50Q3486SQ/15/25.08.09.rar
===============================================
These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.
now includes us and Canadian cams
to activate these cameras on your map copy and paste The two files .VER and .Ov2 for each camera into your map folder on your device or memory card and use alberts easy activator or benbbs's key gen to activate them
=========================================
benbbs
KEYGEN
Code:
http://www.amigura.co.uk/s4.php?d=0/48Q07U19Z8258J7/15/ISO-8859-1__TomTom_Keygen_v3.1C.zip
META
Code:
http://www.amigura.co.uk/s4.php?d=0/50M06P38Q3272FF/15/ISO-8859-1__meta.rar
=========================================
alberts easy installer
Code:
http://www.amigura.co.uk/s4.php?d=2/94EWG53050MSI/13
=========================================
THE FOLLOWING IS A NOTE FROM MSUBEDAR AND THE CREDIT FOR IT IS RIGHTLY HIS.
ALSO NOTE
These Camera files I post up here are NOT POI's.... On most new Navcore's you cannot see them as a POI (However, on some older versions I have seen them visible as a POI), As these are original TomTom files, your tomtom NC will read them as originals after they have been patched to your device so it does not need to show them as a POI. Your TomTom will know what to do with them and automatically will add a warning beep etc which is something you can choose and change to which beep you want etc. BUT AGAIN, THESE FILES ARE NOT RECOGNIZED AS A POI. (For example if you also use SCDB Camera files or PocketGPS Camera's, you will notice that they are available as POI's so you have the normal settings available to you to change if you wish.)
Once the files have been patched to your device (.dct files created) then just put all the files in your map folder (.ver file not needed but no harm is done if you also put them in).
To check if they work: (Tip: I would just switch off any other camera files you may have in the POI section like PGPS or SCDB Camera's to avoid confusion while testing)
Create a route where you know you will be going past a Camera (To be sure, create the route so you are on the correct side of the road, in the same direction the Camera is facing) and in Route Summary, do a Demo of the Route (at 500% is fine) and if the camera shows up whilst its on the Demo and it beeps then you know everything is working.
HOPE THIS HELPS
Bookmarks