Hi B4L
Should take no more than an hour. Part # 6871VSNB03E. $25 if you are a service agent, unsure if you are not. Good profit in this repair!
Hi a LG 42PX4DV-AA
Y sustain 3 board replacement kit
Are they a difficult job to fit and how long to do it.
cheers
When you do things right, people won't be sure that you have done anything at all
Look Here -> |
Hi B4L
Should take no more than an hour. Part # 6871VSNB03E. $25 if you are a service agent, unsure if you are not. Good profit in this repair!
Wow I got quoted under $140 you sure it's $25 for trade for
the 3 board repair kit
cheers
When you do things right, people won't be sure that you have done anything at all
Yep, as an ASC we pay $25 for the 3 PCB's! If you get from Statewide, that price wouldn't surprise me at all........
Wow can any one here help out with sourcing one of these
for those prices
When you do things right, people won't be sure that you have done anything at all
Wish I could help but the boss wont let us buy parts to re-sell. Maybe someone else could help out?
Thats way lower than the price i have been quoted , i cant believe its only 25$ i have one that died last week and have it pulled apart sitting on my bed at the moment and 2 of the boards are as big as computer mother boards.
If i can get them for that price i would buy 3 sets as spares
dont say linux if i wanted it id install it
I would buy 3 as spares as well lol
When you do things right, people won't be sure that you have done anything at all
I can help .Check pm
Mickdunn71 (16-09-16)
Sounds good to me
thanks amte
When you do things right, people won't be sure that you have done anything at all
When you take the bottom cage out that contains the main and tuner boards be carefull as you might rip out the cable feeding the control board underneath.
It is best to set Vy to what is on the back of the panel.Will be -75 -80 or -85.
The kit comes set at -80.
Two blokes with experience and a battery drill for a screwdriver you can do in half hour , but dont rush the first one.
Thanks for the heads up you make it look easy lol
When you do things right, people won't be sure that you have done anything at all
oscar, GO HARD 22mins, one tech, move fast, stop stuffin around... but if it's cash 2.5 hrs
LOL
Good to see you back Ian.
Get the stopwatches out lol
Hey IWAC, you're back! What took so long? LOL
Yeah wallaroo, no austech over xmas was suffering DT's, and couldn't type, handshaking to much, had to have a couple of stiff drinks before i was able to re-register
oscar, we out of practice since they went, might have to come up your way and get some practice in....NOT!
Last edited by iwacelect; 10-01-08 at 03:47 AM. Reason: addition
Are the 3 board kits available for Hitachis?
Specifically a 42PMA400A and can anyone help out with a set of boards???
Part no's are as follows:
Xsus- NA18106-5008
Ysus- NA18106-5009
Zsus- NA18106-5010
CHEERS!!!
Knight.
Mate Im pretty sure they are LG panels.
If you read the sticker on the back of the panel its prolly a V6 LG
Be aware there is sometimes a difference in control board.
Hi!
Its actually a fujitsu panel in the Hitachi......
Oscar your the man
many thanks to all
When you do things right, people won't be sure that you have done anything at all
Bookmarks