I don't know if this will help.
I recently bought an external antenna for a Garmin GPS, when it did not work I discovered that Garmin and Microsoft use a different Baud Rate than most other GPS units. 4800 as opposed to 9600.
I think everyone that is having problems with the keygen is that your saving it as .txt
If you are unsure uncheck hide known file extensions. If the icon is a notepad icon then thats a good indication that it wont work. It should be .unl
This is my first post and the first time I tried this it worked flawlessly, thank you so much for your guys hard work. Amazing.
I am having a couple of issues though, I have a chinese 2din dvd gps etc, everytime I start the garmin I have to press "accept" to use it when im not driving etc. Can I bypass this step?
Also it wont save anything, like my home and work places etc. Any ideas?
great forum guys
I don't know if this will help.
I recently bought an external antenna for a Garmin GPS, when it did not work I discovered that Garmin and Microsoft use a different Baud Rate than most other GPS units. 4800 as opposed to 9600.
Hi Hollowman,
I set up my sd card and got the same errors. I copied the .dll and rewrote the Garmin.mscr to use my card name "SDMMC".
However something looks wrong in half-way into the Garmin file. There's the following line:
SET SETMEM, SystemPath("ScriptPath")\"SetMem.exe"
Where is the SetMem.exe file?
I don't have one, and I doubt that anyone else does either. let me know if I'm wrong about that.
I was hoping this might be the reason for the issue.
I commented out the following lines:
line 20:#SET SETMEM, SystemPath("ScriptPath")\"SetMem.exe"
Line 21: #Run (%SETMEM%, "6000")
Line 28: #Run (%SETMEM%, "3840")
Before this, Garmin simply wouldn't load. After that, the entire O/S Hung. not good.
I'm now thinking about commenting everything in the Garmin.mscr file out then working through each line bit by bit. If one line runs, then uncomment the next and so on.
Will keep everyone posted on my progress.
First I'll try to run ONLY THE FIRST AND LAST BLOCKS of code:
If(WndExists("Garmin Mobile XT"))
Show("Garmin Mobile XT")
Exit
EndIf
#Start explorer.exe and wait a second
Run("\windows\explorer.exe")
Sleep(1000)
###
# eVERTHING IN THE MIDDLE COMMENTED OUT
#
#Kill explorer.exe
If(ProcExists("explorer.exe"))
Kill("explorer.exe")
EndIf
The net result of this test will be to windows explorer will open and close?
Last edited by lambomania; 20-06-10 at 08:37 PM. Reason: updated information
I still cant save my home, would this be a garmin error or my device?
This is a follow-up to an earlier post. Like many of the users, I ran into problems starting Garmin after installing the Micro SD Card.
First, I had the issue that Kevaclone reported:
"ProcExists" requires toolhelp.dll on your device
Line 34
(\StorageCard\Garmin\RunGMXT\Garmin.mscr): if(ProcExists("explorer.exe"))
Thanks to Hollowman, I was able to download the toolhelp.dll
After that, Garmin would fail to start or the whole operating system would hang.
A number of people suggested that the Mortscript in garmin.mscr might be wrong. If the microcard had a different name, then it might not work, etc.
The main problem is that Garmin could not find the correct navi.ini.
Directions.
1) Copy the nav.ini file from the Garmin folder
2) paste it into the root folder.
3) if you already have a nav.ini folder, then overwrite it.
I recommend anyone that had similar problems to try this.
My nav.ini at the root was trying to run the wrong .exe file.
My card-name is sdmmc, but I didn't need to change the garmin.mscr file.
If you think something is wrong with your Garmin.mscr file, then add some pop-up messages and see if they execute.
For example: Message("Start of mscr")
this should pop up a message when Garmin starts. if you add this to the top of the file and don't see anyting, there's a chance that your file isn't being executed. That's what happened in my case.
Thanks Hollowman for all of the information. It has been very helpful.
Last edited by lambomania; 20-06-10 at 08:41 PM. Reason: Updated Information
Ok guys I figured out how to save settings and I thought I would pass it on.
When running garmin on a chinese dvd gps etc to save you must exit the software via the software itself so that it saves the current settings. Just changing back to the radio or turning the car off wont save your changes. Pretty obvious really but I just wanted to share my results.
Maybe someone should sticky a troubleshooting to the first post in this thread?
Now I just need to nut out why my arrival times and clock dont sync up........
[QUOTE=hollowman;232929]
4) OPTIONAL - Extra (optional)
thanks hollowman just installed garmin using your direction in post one all works great i would like to know how to install the vehicles thanks dr death
i already follow the instruction..but when i insert the sd card...the In-Car DVD/GPS it only open the media file..i cant even click on NAV button..
by the way this the model double din car dvd audio (single slot sd card)...\sd card 2gb\ anybody can assist me..i cant even browse the sd card on the double din..any help would be appreciated
Last edited by juragan; 10-07-10 at 02:40 AM.
[quote=dr_death;313079]I think you have to make a folder called Vehicle inside the Garmin folder and place the vehicle files after your unrar them into that folder.
I have an Asus R300, and I have it unlocked. IGo is working on it but for the life of me, I cannot get the GPS to start looking for satellites with Garmin Mobile XT. I have the option of picking these:
But it doesn't appear that any of them work. Can anyone help? TIA
Thanks a lot for sharing.
I downloaded the main program. But there is no Chinese option for the language choice.
What can I do to display Chinese?
I simply inserted a Font folder with some chinese.ttf, but it doesn't work.
Last edited by stocklover; 20-07-10 at 03:07 AM.
Hi, new to this forum, so if I'm off topic sorry!
I installed XT onto my chinese 7inch PNA ok. it's a bit buggy but relatively OK.
Used XT from "artful" and the usual unlocker v1.5
BUT after several days of not getting the right unlock code for sw.unl read that Chinese PNA just use a Device Id of "0", that's zero. Not what XT says when you get to the "about screen".
It worked, fed "0" into the unlocker pasted the code into sw.unl and it runs.
It is still buggy, doesn't exit nicely, and some functions result in a crash, will continue working on those. I've pointed the devices GPS button to a nice program "myboot.exe" which gives me the options of iGo, OziexplorerCE and, now Garmin XT.
Turning into quite a nice mapping tablet. Easy to see, and big enough to have two people look at it a the same time. The inbuilt GPSr isn't the best but so am considering an external SirfStar mouse via usb.
Last edited by Jon B; 13-08-10 at 10:28 AM. Reason: wrong file name
mio moov 370
Garmin works great - besides the no GPS found problem
As all i've tried the port splitter com2 baud 57600
and it searches around 20%
i've triede option 2 (internal) let it run for at bit
disable
enable option 3, com2.
And nothing..
I works on my mio digiwalker 269+ and finds the gps without problems....
Revenge. Look at post #113 in this thread . I have a Moov 360 working using this info with a couple of small changes. Read it carefully .
HI Hollowman, can you guide me through the process of editing the garmin.mscr file to suit my device. I have not been successful as yet. My device is a uniden 3.5in running windows ce core 5.0.
Much appreciated.
What I have tried so far;
Installed toolhelp.dll,
Installed core.dll,
Tried editing .mscr file.
Last edited by nowun; 21-08-10 at 07:10 PM. Reason: additional info
Hi All, First post here on Garmin thread. Just wanted to share past weeks effort to get v5.00.30 up and running. Used original tut and content from Hollowman Post #1 (many thanks to you-your pioneering work an inspiration.) Then supplemented using 5.00.30 version from artful, "split" que.exe for 1111111111 (unit or card ID for map unlock) from iredeto and edit instructions from betahash (noeman forum - google 5.00.30 & noeman). Thanks to those guys too. So used Ultraedit (30 day trial version from Ultraedit website) to edit Que.exe for 7" chinese double din gps unit using "StorageCard" as opposed to SDMMC and it now runs successfully (3D map not quite centred after edit mod, but settings now successfully being saved directly on SD card-No copying up to unit & down again). Unit is SirfIV chip with 128MB running WinCE6.0.
Whatever folders you set in the que.exe should match the physical folder structure and the XML file stored with the NVM files in order to correctly save your settings. GPS set-up required nothing and worked straight off once AU map unlocked. (Port COM 2 at 9600).
MSCR script below for anyone interested. Que.exe edit quite easy (either search by memory address as per instruction or by ASCI value of SDMMC).
Edit instruction courtesy of betahash (plus some touch-ups)
-----------------------------------
How to:
Step 1. DIY
1.1 Donwload the Que.exe (Artful/iredeto). Try Winhex or Ultraedit to open it, make the changes and just exit and save. Should remain an exe not a text file.
1.2. Edit as follows: Goto address (Ctrl-G in UE) 0x460690 or search for ASCI value of SDMMC if address does not yield folder string values
1.3. Change all readable vars to your SD. Just type in the ASCI portion of the Ultraedit window (changes the Hex for you)
eg "/garmin/" ->"/Storage Card/Garmin/" -- in CE5
"/garmin/" -> "/SDMMC/Garmin/" or "/garmin/" -> "/StorageCard/Garmin/"-- in CE6
or others, "/garmin/" --"/your sd folder/garmin/"
Make sure all the strings don't cover each other, and have a trailing "00 00" in hex.
1.4 those strings stand for settings "where to find the map img", "where to put / read customized settings ", "where to put favorite POI" & "full path and file name for favorite poi".
The 0x460690-0x460760 is the address range for path setting in the program.
That is to say, you just need to modify the few strings in the file.
1.5 It is NOT tested running GMXT in residentflash/my flash disk/ and so on. Even if you make related changes in the executable file, I am afraid you could never succeed.
As long as internal flash has /garmin/ folder, the program will promote "... insert original SD card ... ".
And till now, I haven't find a copy or version could be launched in internal flash.
1.6 If you are CE 6 users, change address 0x12e from "05" to "06" in hex (depending on Que.exe version you get this may already be done).
Step 2. DIY
2A If your console is CE6, download Artful's pack. Easily rename the modified executable file, and put it in /garmin/app/wm/ folder (rename original).
2B In CE5, download betahash 2nd package. That is all that is needed. Put your DIY file in /garmin/app/wm/ folder.
Please empty "garmin/save" "garmin/poi, garmin/GPX" folders UNLESS you are in China and you could read chinese.
Step 3. Edit Garmin/runGMXT/garmin.mscr
IT IS NECESSARY to read and edit Mortscript. You are hereby required to do so if you want to use it with my 2nd pack.
betahash garmin.mscr does following jobs (FOR CE5)
3.1 Kill explorer, set the registry to hide taskbar (in case taskhide does not work), launch explorer and hide it.
This is essential because without explorer and its multi-window switch facilities, Garmin could not display GUI in CE.
3.2 Launch GPS-gate, a GPS-port mirror tool. In most CE5, Garmin could not work with most gps port.
I am not professional enough to find the reason(port write-back, & GPS interfaces).
But I dare to say, GPS-port is a good tool for Garmin. Garmin doesn't work with port-splitter, another virtual port mirror tool.
This is optional. But a survey suggested 90% PNA need this tool.
3.3 Kill explorer again, restore taskbar registry entries, and load a explorer process when necessary.
My CE6.0 mscr
-----------------------
Errorlevel("warn")
If(WndExists("Garmin Mobile XT"))
Show("Garmin Mobile XT")
Exit
EndIf
#Run explorer.exe and wait a second
Run("\Windows\Explorer.exe")
Sleep(300)
#Hide Taskbar
Run(SystemPath("ScriptPath")\"TaskbarHide.exe")
#Run Garmin Mobile XT.
#This script will not go to the next command before que.exe completely shut down
RunWait(SystemPath("ScriptPath")\"..\Apps\WM\que.e xe")
#Kill explorer.exe
If(ProcExists("explorer.exe"))
Kill("explorer.exe")
EndIf
---------------------------
Hope this helps someone else and many thanks to all those contributing to the forums.
Cheers,
wack (26-08-10)
Hi all.
I have a navman my50t...have unlocked it with mio pocket...have loaded the linked files...and can get it running okay except it can't connect to the Garmin GPS...and keeps asking me to...purchase and go...begin free trial...enter product key...connect to a garmin GPS...
when i skip the connect option and goto the settings and try to connect to other GPS i get a message saying can only connect to Garmin GPS...
Any thoughts???
thanks in advance
Last edited by AChchGuy; 03-09-10 at 04:03 PM. Reason: problem solved
well after much trial and error i have now got my navman my50t sorted...had to edit the notepad documents that were automatically saved as a text document...so after deleting the .txt from the end of the file and I am glad to say HOOBLOODYRAYYYY !!!!!!!!!!!!!!...works.
Thanks Hollowman for the links etc.
and happy motoring everyone.
Hi Newbie here,
Thanks for the amazing information found here. I don't even own one of the Chinese PDA's yet but I am looking to buy a 6" screen which runs Windows CE 6 and from reading some of the posts here I think there might be problems running the Garmin software on CE 6.
Can anyone tell me if CE 6 has problems that prevent the software from running? It is getting hard to find a 6" screen with CE 5, that's why I am asking this question.
Many thanks,
JP
Bookmarks