7020 bouquet location + will HDD & CF work together

[rockeater]

Guys,
Decided to swap 7000 for 7020 to free myself from 120GB HDD limit but have nothing but trouble. When I got the 7020, It had latest PLi in the flash installed but it would not turn the dish (and also only 1 sat could be selected with diseq). So installed Gemini 4.6 and it solved the Diseq problem.
But...
Firstly, Dreambox Edit appears to send my 7000 bouquets to 7020 and reads them back OK but... under blue bouquet button I just get empty "Favourites". What is wrong? What directory does 7020 use and what attributes do you have in there?
Secondly, Pli might not have been able to move the dish but HDD and CF coexisted OK. Under Gemini, the moment I plug in Compact Flash, both the CF and the HDD disappear. Is there way around it or is it back to USB?
Any help appreciated.
Cheers
Roman

[nfnovice]

- after sending bouquets - you have to re-load
- sometimes it takes a reboot (from remote control not webif)

- try hdd on slave as CF grabs master - my 7020 works fine like this (pli)

- there were motor issues on 7020 with pli
- I seem to recall something on increased voltage needs to be off (jonc will know Im sure)
- but I dont have one so cant be too sure

[rockeater]

- after sending bouquets - you have to re-load
- sometimes it takes a reboot (from remote control not webif)

Thanks for your reply.
I rebooted it countless times...

- try hdd on slave as CF grabs master - my 7020 works fine like this (pli)

With PLi it just worked. But it does not with Gemini. But I will try disconnecting HDD and then connecting it back when CF is recognized.

- there were motor issues on 7020 with pli
- I seem to recall something on increased voltage needs to be off (jonc will know Im sure)

Increased voltage is off. Perhaps I should put it on. :-)
Strange that it now drives the motor to the 156, 152 and 160E but will not go to PAS8, AisaSat4 or NSS6...