Go 10700 , 10700 , 11700 ( a dreambox presumably ? )
Gday People,
Done many searches - not sure what's going on.
have upgraded my lnb to 10700 but can't get a lock & sync.
Have tried all skews.
settings: non standard user..
lnb 10700 forall three - uncreased voltage unchecked
22khz hi/lo voltage H/V
Sat find stats - optus c1 only
snr 60%
AGC 25 - 80% unstable
TP 12438 27800 H
Can't get signal higher with different skews - in Perth
Manual scan - found zero services
Can't even get TVSN
Old Lnb works fine but without new channels and satellite.
Hope someone can help.
thanks in advance
Look Here -> |
Go 10700 , 10700 , 11700 ( a dreambox presumably ? )
no luck sanity - yes dreambox 5oos
LNB specs
MTI AP8T2 Universal offset LNBF
Range: 10.7 - 12.75 ghz
LO: Low band. 9.750Ghz
High Band:10.600 GHZ
Some thoughts:
High band is 10.600GHZ but range is 10.7 on LNB specs?
Could my dish need slight adjustment? - is signal too low
Why can't i get TVSN - is it now on D3?
LNB a dud?
thanks
That LNB is a universal, not a 10700.
perhaps a universal lnb not a specific 10700 lnb.
Go 9750, 10600, 11700.
You are using a universal lnb not a 10700!
I have the same Universal LNB set to...
LOF/L: 09750
LOF/H: 10600
Threshold 10600
Don't let the number of posts fool you :-)
The 10700 doesn't have a switching point. *If* the LNB was a 10700, the third box could have 00000, 10700 or 11700 as the 'switch point' won't be used to change the L.O.F.
If you change the LNB from 0 to LNB 1,2,3,4 - whatever, it will default back to universal settings without having to key them in
Don't forget to save with the green button
Reality is an invention of my imagination.
ಠ_ಠ
Try this
Become a Premium Member and support the Austech Forum
Thanks everyone back on with correct universal lnb settings. Used your settings cbander.
Learnt something new today.
Cheers
Bookmarks