I've uploaded an almost complete backup of my One XL-Regional (4EG0.001.08) with Navcore SE8.412.1236 with TTSYSTEM file optimized for use with TomTom 32 MB One and ONE XL device includes LoquendoTTS v6.5-6.9 US+UK English voices (standard 8.412
ttsystem also included for those with 64 MB units).
Voices are USA: Dave and Susan; UK: Kate and Simon.
NOTE: Startup/suspend/shutdown sounds may not work with this backup.
Instructions Note: this is later than the one in the download.
1)
Backup your device with Windows Explorer - DO NOT miss this step!
2) Delete all the files on your device (Quick format will do this)
3) Copy all files in the downloaded folder to the root of your device.
DO NOT copy the folder itself, only its contents.
4) Copy your map folder to the device.
5) The uploaded navcore is missing device specific files. To create them disconnect the device from your PC and boot it once before attempting to patch the map if it hasn't been already.
6) Reconnect to the PC and using the latest keygen, patch the map (may not be required if the map has already been patched on that device). The ttsystem is already patched.
7) Disconnect and reboot your device.
8) If it boots okay, connect to TT Home and update quickGPSfix and Mapshare. NOTE: TT Home may want to update the Loquendo voices to the latest v7.x, DO NOT do this if you have a 32 MB device as the v7.x voices rarely work on these. These will be offered every time you update, however, after a while Home stops automatically selecting them.
9) Copy personal, sound and graphic files from your backup to the device.
10) Once everything is set up to your satisfaction do another backup. It is much easier restoring from a full backup than having to reload everything manually.
11) Enjoy.
Note: the
ttsystem file in this backup is optimized for 32 MB devices. If your device is 64 MB, you can use the standard v8.412
ttsystem file which is included (
Original-8412_ttsystem). Rename it after deleting the optimized file. You will also have to delete
Config folder contents and replace it with the one in switchfiles.zip. You will likely also have to configure the
setconfig.txt inside the new
Config folder too.
Bookmarks