which provider/card?
and is this over local lan or wan?
what r u using as server?
I `ve got CCcam 2.1.3 now
IR2 use to freazing every 1 hour at first time.With 2.1.3 it freezes bit longer than it was working with 2.1.2.
Can anyone conforme that!
Last edited by MR-MIXER; 22-11-09 at 03:56 PM.
If it is working ,do not touch it
Look Here -> |
which provider/card?
and is this over local lan or wan?
what r u using as server?
Datalane -
jtc2005,
How many IR2 we had countermesure issue ?
and are we been having local issue or wan..
7020 serves with Pli2
If it is working ,do not touch it
Hi Mr mixer! I might be able to test for you, but do you mean it freezes for longer? Or it takes longer until it freezes?
no, it takes long time to freaze.
It was freazing every 30 min or 45 min .with new cam it feazes every hour or bit more.
If it is working ,do not touch it
check other receiver if have same problem ?
You know, some times CS isn't 100% perfect.
If you want 100% perfect, all of the time, then you need to pay foxtel for it, although even then it's not always perfect, but hey, you can phone them & they will sort it for you.
However, your asking if they (the provider) has deployed Countermesures against CCcam 2.1.3.
The answer is no. They have not.
They have not targeted a specific emulator differently to others.
If it bothers you (the odd glitch every hour or so is not that bad if your stealing foxtel. Thats the pay off for not having to pay for the service) then try a different server such as NewCS.
Your glitch is more likely to be at the server end rather than the emulator end. You could also try another emulator for the client. Evocamd/CCcam/Newcamd/Mgcamd all use the Newcamd protocol.
I'll also add from the client side of things that the dm500 has a limited system as far as cpu and memory go. They can sometimes develope a 'memory hole' that can cause glitching. That sort of problem is often resolved by pulling the power for 10 seconds and then re-booting it.
Reality is an invention of my imagination.
ಠ_ಠ
comtj (26-11-09)
Test your end with these 2 and it should give you a good idea of how your internet is running
But like Fernbay said 1 glitch every hour is better than my paid service
I heard it was even worse with HD
When you do things right, people won't be sure that you have done anything at all
I am lost in translations. never mind...
I don`t understant how did topic get in this.Someone actually suggesting
"Pingtest.net - The Global Broadband Quality Test
Speedtest.net - The Global Broadband Speed Test"
wow...
It freazes the same as before...
If it is working ,do not touch it
MR-MIXER (26-11-09)
Yes, this thread is very un-clear.
What exactly are you saying in the above quote?
For starters .... your problem is NOT a countermeasure, unless the provider is selectv (or UBI apparently)
Second. Is your setup on a LOCAL NETWORK ONLY, or are any of the clients or the server outside the lan (on the internet) ?
Third. What is your definition of "freazes"?
Does the picture freeze and stay frozen? Or does the picture freeze and then restart after 20 seconds? Does it freeze and lock up and need a reboot to get it going again?
Fourth. What provider are you using?
5. What server are you using? Are you using CCcam for the server, as well as for the clients?
Reality is an invention of my imagination.
ಠ_ಠ
UBI is another provider that uses countermeasures.
He is referring to the usual freeze (key disabled temporary) you get due to the countermeasure (extra load on the key). It gets released again after some 15min or so, then it freezes again (key disabled temporary).
He is saying the time until it freezes again is longer in 1.2.3, i.e. he can watch a bit longer now.
Reality is an invention of my imagination.
ಠ_ಠ
Cool so UBI has this anti piracy feature
What other providers are using the same feature ??
Cheers
When you do things right, people won't be sure that you have done anything at all
1) UBI has countermeasure problem too...
2) countermeasure problem LAN or WAN still the same
3) the usual freeze (key disabled temporary) you get due to the countermeasure (extra load on the key). It gets released again after some 15min or so, then it freezes again (key disabled temporary).
I am saying the time until it freezes again is longer in 1.2.3, i.e. he can watch a bit longer now. (Thanks riadmelb)
4) as i said UBI or SELECT
5) The topic is CCcam ofcours I am using CCcam as I write it .
If it is working ,do not touch it
Reality is an invention of my imagination.
ಠ_ಠ
Bookmarks