TomTom One XL Upgrade Request

[dpjordan]

I am interested in upgrading my One XL if possible to include Spoken Street Names & Lane Guidance. It currently has installed Navcore 8.010, Boot 5.3026, OS 190943 & Australia Map v720.1868. If anyone has tips on how to proceed with an upgrade, it would be greatly appreciated.

[Downunder35m]

Check thread for the Navcore 8.412 fullbackup.
And you can find the brand new 840.2562 map .
Please check the tutorials on the how to...

[dpjordan]

Thanks to DownUnder I have upgraded my TomTom One XL to include test to speech, but I am know finding that the spoken route instructions are delayed and hence are out by about 25 metres. (you can be around the corner already when the TomTom tells you to turn).
Is this problem a result of running a full function navcore on 32Mb unit?
Is it possible to upgrade the RAM?

Unit: TomTom One XL model# 4S00.006

Navcore: 8.412 (1236/090403) OS: 303268
32 MB Ram (free: 5.9 MB)
GPS v1.20, Boot 5.3026
Map v 840.2562

[Downunder35m]

You still have just enough free RAM to use the computer voice.
Is the map moving smooth or more in a stop and go motion?
Is the problem the same with a normal voice instead of using a computer voice?

[dpjordan]

Downunder, thanks for responding, the problem occurs with the computer voices are enabled. With computer voice (Simon) enabled the frre RAM drops to 4.3MB. The map moves smoothly but does a lot of route recalculation with me deviating from the prescribed route. I do have IQ routes enable along with an active RDS TMC traffic receiver. I will appreciate your thoughts.

[Downunder35m]

The 8.412 I posted is optimised for the 32MB models.
But I never got feedback from someone with a TMC receiver...
The recalculations are normal and sometimes a pain if the route is pretty long ,but not much that can be done...
The only othe option would be to stay with the original Navcore offered be Home (and with that no IQ routes and Computer voices).
There are other Navcores to try ,but most of them are for 64MB models only and it would be a guessing game for me to give you any advise which one would work.

You could check in to GPSU and try different Navcores ,but I would not know which would be better than the 8.412 -sorry

[evl351]

Just a thought but have you got any or many POI's displayed on the map !!
If so de-select them from being displayed as this will slow everything down dramatically.
Cheers.

[hollowman]

i had a lot of poi's showing on mine, it almost killed the unit lol.
going extreamly slow
turned them off, then back to normal !!

[tedy bear]

Can someone help me with a latest keygen patcher for the maps??

[hollowman]

yes we can help you.... because thats what forums are for.... but you need to tell us what you need help with ????

[tedy bear]

I just downloaded this new map 840.2562 for my XL ONE..and to get it to work i believe i need to patch it to my device..is that right?

[peter3535]

tedy bear
Dont for get to make a full backup first with windows

[tedy bear]

yep done that

[Downunder35m]

Then I suggest to read the tutorial and use the Keygen3.1G.
Some people here already confirmed that this method is working

[lnb]

ive finally updated my TT one v2 (bluetooth & SD card)
using the above links

840 map
8412 navcore

initially got the same message as posted earlier
of map not able to be used

reloaded the keygen and seemed to work then

all was fine until i uploaded my mapsettings.cfg (from the old version)

then it had that same

kept rebooting in a loop

i deleted it and then it booted fine

and tt home was ok also

using PNA-tt infotool.. says its a PNA: one 2nd edition device: XL340-IQ routes

so the look is a little different to what im used to

when connecting TThome and error appears saying
to use home, you need to install the correct TT application....