I am a little confused?
Title says d2 and your text says d1.
Eitherway 11300 is good for both.
will i be able to get a lock on d1 with an 11300 or do i need a 10700?i thought i was close and got lnb overload message.never seen that before.
Last edited by satbeginner; 12-12-09 at 09:18 PM. Reason: d1 not d2
Look Here -> |
I am a little confused?
Title says d2 and your text says d1.
Eitherway 11300 is good for both.
satbeginner (13-12-09)
only C1/D3 needed the 10.700 for the recently rearranged Austar/Foxtel channels.
Aurora on C1 is still 11300 as is D1 and D2.
Its just that if your using one dish for everything, go for the 10.700 otherwise as scholcker says,11.300 does the job
satbeginner (13-12-09)
Out of C1, D1, D2 and D3... Only D3 has some transponders outside the receiving capability of an 11300 LNB.
So for any of the Optus sats apart from D3, 11300 will still be fine.
For flexibility and compatibility (maybe future use) a 10700 LNB would be a good choice.
satbeginner (13-12-09)
thanks guys.it was d1 i was talking about,typo error.ill give it another go.thanks
Bookmarks